Cautionary Statement Regarding Forward-Looking Statements

From time to time, we make written or oral "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995, including statements contained in our filings with the Securities and Exchange Commission, or SEC, (including this Report on Form 10-K), our annual report to stockholders and in other communications. These statements do not convey historical information, but relate to predicted or potential future events, such as statements of our plans, strategies and intentions, or our future performance or goals. Our forward-looking statements can often be identified by the use of forward-looking terminology such as "believes," "expects," "intends," "may," "will," "should" or "anticipates" or similar terminology, and include, but are not limited to, statements made in this Report regarding:

Investors and prospective investors are cautioned that such forward-looking statements are only projections based on current estimations. These statements involve risks and uncertainties and are based upon various assumptions. We discuss many of these risks and uncertainties under Item 1A "Risk Factors," below, and elsewhere in this Report. These risks and uncertainties, among others, could cause our actual future results to differ materially from those described in our forward-looking statements or from our prior results. We are not obligated to update these forward-looking statements, even though our situation may change in the future.

INTRODUCTION

We are an independent designer, manufacturer and marketer of manipulator and docking hardware products, temperature management systems and tester interface products that are used by semiconductor manufacturers in conjunction with automatic test equipment, or ATE, in the testing of integrated circuits, or ICs. Our high performance products are designed to enable semiconductor manufacturers to improve the efficiency of their IC test processes and, consequently, their profitability. We supply our products worldwide to major semiconductor manufacturers and semiconductor test subcontractors directly and through leading ATE manufacturers. Our largest customers include Analog Devices, Inc., Cascade Microtech, Inc., Credence Systems Corporation, Finisar Corporation, Hakuto Co. Ltd., LTX Corporation, Sony Corporation, STMicroelectronics N.V., Teradyne, Inc. and Texas Instruments Incorporated.

The consolidated entity is comprised of inTEST Corporation (parent) and our wholly-owned subsidiaries. inTEST Corporation was incorporated in New Jersey in 1981 and reincorporated in Delaware in April 1997. We manage our business as three product segments as more fully discussed under "Our Segments" below. Our Manipulator and Docking Hardware segment consists of our manufacturing operation in Cherry Hill, New Jersey as well as our subsidiaries in Singapore (inTEST Pte), Japan (inTEST KK) and Germany (Intestlogic GmbH). Our Temperature Management segment consists of our subsidiaries in Sharon, Massachusetts (Temptronic Corporation) and Germany (Temptronic GmbH). Our Tester Interface segment consists of our subsidiary in San Jose, California (inTEST Silicon Valley Corporation).

INDUSTRY

Overview

The semiconductor market has been characterized by rapid technological change, wide fluctuations in demand and shortening product life cycles. Designers and manufacturers of a variety of electronic and industrial products, such as cell phones, telecom and datacom systems, Internet access devices, computers and consumer electronics, require increasingly complex ICs to provide improved end-product performance demanded by their customers.

Semiconductor manufacturers generally compete based on product performance and price. We believe that testing costs represent a significant portion of the total cost of manufacturing ICs. As product life cycles shorten, semiconductor manufacturers are under more pressure to maximize production yields and reduce testing costs. At the same time, the growing complexity of ICs has increased the difficulty of maximizing test yields. In order to address these market trends, semiconductor manufacturers strive for more effective utilization of ATE, smaller test areas and increased wafer level testing.

Demand for new ATE and related equipment depends upon several factors, including the demand for products that incorporate ICs, the increasing complexity of ICs and the emergence of new IC design, production and packaging technologies. Some of the evolutionary changes in IC technologies include the shift to 300 mm wafers in production, system-on-a-chip, or SOC, where digital, analog and memory functions are combined on a single IC, and chip scale packaging. As a result of these and other advances, semiconductor manufacturers may require additional ATE not only to handle increases in production but also to handle more sophisticated testing requirements of ICs.

IC Test Process

Semiconductor manufacturers typically produce ICs in multiples of several hundred on a silicon wafer which is later separated or "diced" into individual ICs. Extended leads are then attached to the individual ICs, for later connection to other electrical components, before the ICs are encapsulated in a plastic, ceramic or other protective housing. These process steps are called "packaging."

Wafers are tested before being diced and packaged, to ensure that only properly functioning ICs are packaged. This testing step has several names including "front-end test," "wafer test" or "wafer probe." In front-end test, an electronic handling device known as a wafer prober automatically positions the wafer under a probe card which is electronically connected to a "test head," which connects electrically to a test system. Once the good ICs have been identified, they are packaged.

The packaged IC also requires testing, called "back-end test" or "final test," to determine if it meets design and performance specifications. Packaged ICs are tested after loading into another type of electronic handling device called a "package handler" or "handler," which then transfers the packaged ICs into a test socket which is attached to the test head. These handlers may be temperature controlled for testing. "Wafer probers" and "handlers" are sometimes referred to in this Report collectively as "electronic device handlers."

Testers range in price from approximately $100,000 to over $5.0 million each, depending primarily on the complexity of the IC to be tested and the number of test heads (typically one or two) with which each tester is configured. Probers and handlers range in price from approximately $50,000 to $500,000. A typical test floor of a large semiconductor manufacturer may have 100 test heads and 100 probers or 250 handlers supplied by various vendors for use at any one time.

Test head manipulators, also referred to as positioners, facilitate the movement of the test head to the electronic device handler. Docking hardware mechanically connects the test head to the wafer prober or handler. Tester interface products provide the electrical connection between the test head and the wafer or packaged IC. Traditionally, temperature management products are used in back-end test to allow a manufacturer to test packaged ICs under the extreme temperature conditions in which the IC may be required to operate. However, we believe that temperature-controlled testing will be an increasingly important part of front-end wafer testing as more parameters traditionally tested for in back end-test are moved to front-end test.

Trends in IC Testing

ATE is used to identify unacceptable packaged ICs and bad die on wafers. ATE assists IC manufacturers in controlling test costs by performing IC testing in an efficient and cost-effective manner. In order to provide testing equipment that can help IC manufacturers meet these goals, we believe the ATE industry must address the following issues:

Change in Technology. Currently, most semiconductor manufacturers use 200 mm and 300 mm wafer technology, with 300 mm technology gradually replacing 200 mm technology in order to increase throughput and lower manufacturing costs. In addition, end-user applications are demanding ICs with increasingly higher performance, greater speeds, and smaller sizes. ICs that meet these higher standards are more complex and dense. SOC designs are likely to be more in demand in the future. These technology trends have significant implications for the IC testing process, including:

Need for Plug-Compatibility and Integration. Semiconductor manufacturers need test methodologies that will perform increasingly complex tests while lowering the overall cost of testing. This can require combining ATE manufactured by various companies into optimally performing systems. Semiconductor manufacturers have to work closely with various test hardware, software, interface and component vendors to resolve design and compatibility issues in order to make these vendors' products plug-compatible with test equipment manufactured by other vendors.

Testing Under Extreme Conditions. ICs will have to perform across a wider spectrum of temperature and environmental conditions than ever before because of the growing complexity of products in which they are deployed. Temperature testing will likely find an increasing role in front-end, wafer level testing. Creating a uniform thermal profile over much larger wafer areas represents a significant engineering and design challenge for ATE manufacturers.

Demand for Higher Levels of Technical Support. As IC testing becomes more complex, semiconductor manufacturers are demanding higher levels of technical support on a routine basis. ATE manufacturers must commit greater resources to technical support in order to develop close working relationships with their customers. This level of support also requires close proximity of service and support centers to customers' facilities.

Cost Reduction Through Increased Front-End Testing. As the cost of testing ICs increases, semiconductor manufacturers will continue to look for ways to streamline the testing process to make it more cost-effective. We believe that this factor will lead to more front-end, wafer-level testing.

OUR SOLUTIONS

We focus our development efforts on designing and producing high quality products that provide superior performance and cost-effectiveness. We seek to address each manufacturer's individual needs through innovative and customized designs, use of the best materials available, quality manufacturing practices and personalized service. We design solutions to overcome the evolving challenges facing the ATE industry which we believe provide the following advantages:

Scalable, Universal, High Performance Interface Technology. Our universal test head manipulators provide a high degree of positioning flexibility with a minimum amount of effort. As a result, our products can be used in virtually any test setting. Our manipulators have kept pace with the increasing size of test heads, which can weigh up to 3,000 pounds and which may become larger and heavier as the required level of testing sophistication increases. Our docking hardware offers precise control over the connection to test sockets, probing assemblies and interface boards, reducing downtime and minimizing costly damage to fragile components. Our tester interface products optimize the integrity of the signals transmitted between the test head and the device under test by being virtually transparent to the test signals. This results in increased accuracy of the test data and may thus enable improved test yields. We believe that these characteristics will gain even more significance as testing becomes even m ore demanding.

Compatibility and Integration. A hallmark of our products has been, and continues to be, compatibility with a wide variety of ATE. Our manipulators and docking hardware are all designed to be used with otherwise incompatible ATE. We believe this integrated approach to ATE facilitates smooth changeover from one tester to another, longer lives for interface components, better test results, increased ATE utilization and lower overall test costs.

Temperature-Controlled Wafer Testing. Semiconductor manufacturers use our ThermoChuck(R) products for front-end temperature stress screening at the wafer level. This can provide significant cost savings through early identification of defective ICs that will not perform at specified temperatures, thereby eliminating the costs of packaging and back-end testing these defective ICs. ThermoChuck(R) products are capable of handling any size wafer, including a 300 mm wafer, for uniform, accurate and stable thermal testing without contributing to the wafer distortion that can occur as temperature changes are introduced.

Worldwide Customer Service and Support. We have long recognized the need to maintain a physical presence near our customers' facilities. We have domestic manufacturing facilities in New Jersey, Massachusetts and California, as well as overseas facilities in Europe and Asia. We provide service to our customers from sales and service offices in the U.S., Europe and Asia. Our engineers are easily accessible to, and can work directly with, most of our customers from the time we begin developing our initial proposal, through the delivery, installation and use of the product by our customer. In this way, we are able to develop and maintain close relationships with our customers.

OUR STRATEGY

The demand for ICs and ATE has experienced several periods of severe cyclical downturn in recent years, and, accordingly, much of our effort has been focused on reducing costs and conserving cash through these downturns. During both 2005 and 2004, we announced certain organizational changes and cost structure adjustments as part of our continuing efforts to position ourselves to more effectively meet the needs and expectations of the fluid ATE market during such downturns. Our objectives for these changes were to focus our inTEST teams more precisely on each customer's specific needs and to enhance our competitive position and our ability to adapt more quickly to new market challenges and opportunities. See further discussion of these actions, including the costs associated with them, in Management's Discussion and Analysis of Financial Condition and Results of Operations in Item 7 of this Report on Form 10-K.

We remain committed to our goals of being recognized in our industry as the designer and manufacturer of the highest quality products in our markets and becoming the single source supplier of all of our customers' ATE needs, other than probers, handlers and testers. Our strategies to achieve these goals include the following:

Providing Technologically Advanced Solutions. We are committed to designing and producing only the highest quality products which incorporate innovative designs to achieve optimal cost-effectiveness and functionality for each customer's particular situation. Our engineering and design staff is continually engaged in developing new and improved products and manufacturing processes.

Leveraging Our Strong Customer Relationships. Our technical personnel work closely with ATE manufacturers to design tester interface and docking hardware that are compatible with their ATE. As a result, we are often privy to proprietary technical data and information about these manufacturers' products. We believe that because we do not compete with ATE manufacturers in the prober, handler and tester markets, we have been able to establish strong collaborative relationships with these manufacturers that enable us to develop ancillary ATE products on an accelerated basis.

Maintaining Our International Presence. Our existing and potential customers are concentrated in certain regions throughout the world. We believe that we must maintain a presence in the markets in which our customers operate. We currently have offices in the U.S., Europe and Asia.

Pursuing Synergistic Acquisitions. A key element of our growth strategy is to acquire businesses, technologies or products that are complementary to our current product offerings. Our TestDesign, Temptronic and Intestlogic acquisitions have expanded our line of product offerings and have given us the opportunity to market a broader range of products to our customer base. We seek to make acquisitions that will further expand our product lines, enabling us to become a single source supplier to the test floor for a complete selection of equipment compatible with testers, probers and handlers of all manufacturers.

Pursuing Revenue Growth Opportunities Outside the Semiconductor ATE Market. Another element of our growth strategy is pursuing revenue growth opportunities in markets we have not traditionally served, such as the aerospace, automotive, communications, consumer electronics, defense and medical industries. We believe that we will reduce some of the cyclicality that we have historically experienced by diversifying our revenue streams outside the semiconductor ATE market. For the years ended December 31, 2006, 2005 and 2004 approximately $5.6 million or 9%, $5.7 million or 11% and $5.4 million or 8%, respectively, of our consolidated net revenues were derived from markets outside semiconductor test. We cannot determine at this time whether we will continue to be successful in building our sales in these non-traditional markets or what the growth rate of our sales in these markets will be in future periods.

OUR SEGMENTS

Our business is managed as three segments: Manipulator and Docking Hardware Products, Temperature Management Systems and Tester Interface Products. Semiconductor manufacturers use our manipulators and docking hardware products during testing of specialized packaged ICs. They use our temperature management systems and tester interface products in both front-end and back-end testing of ICs. These ICs include microprocessors, digital signal processing chips, application specific ICs and specialized memory ICs, and are used primarily in the automotive, computer, consumer products and telecommunications industries. We custom design most of our products for each customer's particular combination of ATE.

Manipulator and Docking Hardware Products

Manipulator Products. We offer three lines of manipulator products. The inTEST lines of manipulator products are the in2(R), the in2 Pro and the M Series test head manipulators, which are free-standing universal manipulators. Universal manipulators can hold a variety of test heads and enable an operator to reposition a test head for alternate use with any one of several probers or handlers on a test floor.

The in2(R) and in2 Pro universal manipulators incorporate our balanced floating-head design. This design permits a test head weighing up to 3,000 pounds to be held in an effectively weightless state, so it can be moved manually or, in the case of the in2 Pro, with optional powered assistance, up or down, right or left, forward or backward and rotated around each axis (known as six degrees of motion freedom) by an operator using a modest amount of force. The same design features enable the operator to dock the test head without causing inadvertent damage to the fragile electrical contacts. As a result, after testing a particular production lot of ICs, the operator can quickly and easily disconnect a test head that is held in an in2(R) or in2 Pro manipulator and equipped with our docking hardware and dock it to another electronic device handler for testing either a subsequent lot of the same packaged IC or to test a different IC. The in2(R) and in2 Pro manipulators range in price from approximately $12,000 to $159,000.

The M Series line of manipulator products consists of the M400 and M500 manipulators. These compact universal manipulators are designed to handle test heads weighing less than 550 pounds. The up and down movement is supported by an air-pressure-based floating state technology. The M Series manipulators range in price from approximately $12,000 to $45,000.

Docking Hardware Products. Our docking hardware products protect the delicate interface contacts and ensure proper repeatable and precise alignment between the test head's interface board and the prober's probing assembly or the handler's test socket as they are brought together, or "docked." A simple cam action docks and locks the test head to the prober or handler, thus eliminating motion of the test head relative to the prober or handler. This minimizes deterioration of the interface boards, test sockets and probing assemblies which is caused by constant vibration during testing. Our docking hardware products are used primarily with floating-head universal manipulators when maximum mobility and inter-changeability of handlers and probers between test heads is required. By using our docking hardware products, semiconductor manufacturers can achieve cost savings through improved ATE utilization, improved accuracy and integrity of test results, and reduced repairs and replacements of expensive ATE int erface products.

We believe our docking hardware products offer our customers the ability to make various competing brands of test heads compatible with various brands of probers and handlers by only changing interface boards. This is called "plug-compatibility." Plug-compatibility enables increased flexibility and utilization of test heads, probers and handlers purchased from various manufacturers. We believe that because we do not compete with ATE manufacturers in the sale of probers, handlers or testers, ATE manufacturers are willing to provide us with the information that is integral to the design of plug-compatible products. Our docking hardware products range in price from approximately $2,000 to $25,000.

Temperature Management Systems

Our temperature management systems are sold into a wide variety of industries including the aerospace, automotive, communications, consumer electronics, defense, medical and semiconductor industries. Our temperature management systems enable a manufacturer to test a semiconductor wafer, IC or electronic, or in some instances, a mechanical sub-assembly over the extreme and variable temperature conditions that can occur in the actual use of the device.

ThermoChuck(R) Products: Our ThermoChuck(R) precision vacuum platform assemblies quickly change and stabilize the temperature of semiconductor wafers accurately and uniformly during testing without removing the wafer from its testing environment. Such temperatures can range from as low as -65 degrees Celsius to as high as +400 degrees Celsius. ThermoChucks(R) are incorporated into wafer prober equipment for laboratory analysis and for in-line production testing of semiconductor wafers. ThermoChuck(R) products range in price from approximately $14,000 to $105,000.

Temperature Management Systems: Sales to ATE manufacturers are handled directly by our own sales force. Sales to semiconductor manufacturers and customers in other industries in the U.S. are handled through independent sales representative organizations. In Singapore, Malaysia and Indonesia, our sales and service are handled through our own sales and service personnel. In the rest of Asia, our sales are handled through distributors. In Europe, sales managers at our office in Germany, as well as regional distributors, sell directly to semiconductor manufacturers and customers in other industries. Our distributors represent us in 30 countries. We visit our distributors regularly and have trained them to sell and service all of our temperature management products.

CUSTOMERS

We market all of our products to semiconductor manufacturers and ATE manufacturers. In the case of temperature management products, we also market our products to independent testers of semiconductors, manufacturers of electronic, automotive and aeronautical products, and semiconductor research facilities. Our customers use our products principally in production testing, although our ThermoStream(R) products traditionally have been used largely in engineering development and quality assurance. We believe that we sell to most of the major semiconductor manufacturers in the world.

Texas Instruments Incorporated accounted for 19%, 16% and 16% of our consolidated net revenues in 2006, 2005 and 2004, respectively. Teradyne, Inc. accounted for 11% of our net consolidated revenues in 2004. While all three of our operating segments sold to these customers, these revenues were primarily generated by our manipulator/docking hardware and tester interface segments. Our ten largest customers accounted for approximately 59%, 56% and 62% of our net revenues in 2006, 2005 and 2004, respectively. The loss of any one or more of our largest customers, or a reduction in orders by a major customer, could materially reduce our net revenues or otherwise materially affect our business, financial condition, or results of operations.

Our largest customers include:

In 2001, we obtained ISO 9001:1994 certification at our New Jersey facility. During 2003, we made the determination to upgrade to ISO 9001:2000 at our Cherry Hill facility, which is anticipated to be completed in late 2007. As a result, this facility's ISO 9001:1994 certification lapsed in December 2003. In May 2003, our California facility obtained ISO 9001:2000 certification and in November 2004, our Massachusetts facility completed ISO 9001:2000 certification. Finally, our Singapore and German facilities have not yet begun the ISO certification process.

ENGINEERING AND PRODUCT DEVELOPMENT

Our success depends on our ability to provide our customers with products and solutions that are well engineered, and to design those products and solutions before, or at least no later than, our competitors. As of December 31, 2006, we employed a total of 48 engineers, who were engaged full time in engineering and product development. Our practice in many cases is to assign engineers to work with specific customers, thereby enabling us to develop the relationships and exchange of information that is most conducive to successful product development and enhancement. In addition, some of our engineers are assigned to new product research and development and have worked on such projects as the development of new types of universal manipulators, the redesign and development of new temperature management products and the development of high performance interfaces.

Since most of our products are customized, we consider substantially all of our engineering activities to be engineering and product development. We spent approximately $5.4 million in 2006, $5.9 million in 2005 and $6.5 million in 2004 on engineering and product development, respectively.

PATENTS AND OTHER PROPRIETARY RIGHTS

Our policy is to protect our technology by filing patent applications for the technologies that we consider important to our business. We also rely on trade secrets, copyrights and unpatentable know-how to protect our proprietary rights. It is our practice to require that all of our employees and third-party product development consultants assign to us all rights to inventions or other discoveries relating to our business that were made while working for us. In addition, all employees and third-party product development consultants agree not to disclose any private or confidential information relating to our technology, trade secrets or intellectual property.

As of December 31, 2006, we held 43 active U.S. patents and had 20 pending U.S. patent applications covering various aspects of our technology. Our U.S. patents expire at various times beginning in 2007 and extending through 2022. During 2006, we had no U.S. patents expire and 5 U.S. patents were issued. We also hold foreign patents and file foreign patent applications, in each case corresponding to our U.S. patents and patent applications, to the extent management deems appropriate.

COMPETITION

Our competitors include independent manufacturers, ATE manufacturers and, to a lesser extent, semiconductor manufacturers' in-house ATE interface groups. Competitive factors in our market include product performance, price, functionality, reliability, customer service, applications support, and timely product delivery. We believe that our long-term relationships with the industry's leading semiconductor manufacturers and other customers, and our commitment to, and reputation for, providing high quality products, are important elements in our ability to compete effectively in all of our markets.

The independent manufacturers of docking hardware and manipulators that compete with us include Reid-Ashman Manufacturing, Microhandling GmbH and Esmo AG, all of which manufacture docking hardware and manipulators. The ATE manufacturers that compete with us in the sale of docking hardware and universal manipulators include Credence Systems and Teradyne, who are also our customers.

Our principal competitors for temperature management products are Thermonics, ERS Elektronik GmbH and Advances Temperature Test Systems GmbH. The independent manufacturers of tester interface products that compete with us include Synergetix, a division of IDI, Xandex and Reid-Ashman Manufacturing. ATE manufacturers that compete with us in the sale of tester interface products include Credence Systems, LTX and Teradyne.

BACKLOG

At December 31, 2006, our backlog of unfilled orders for all products was approximately $4.8 million compared with approximately $6.0 million at December 31, 2005. Our backlog includes customer orders which we have accepted, substantially all of which we expect to deliver in 2007. While backlog is calculated on the basis of firm purchase orders, a customer may cancel an order or accelerate or postpone currently scheduled delivery dates. Our backlog may be affected by the tendency of customers to rely on shorter lead times available from suppliers, including us, in periods of depressed demand. In periods of increased demand, there is a tendency towards longer lead times that has the effect of increasing backlog. As a result of these factors, our backlog at a particular date is not necessarily indicative of sales for any future period.

EMPLOYEES

At December 31, 2006, we had 224 full time employees, including 100 in manufacturing operations, 87 in customer support/operations and 37 in administration. Substantially all of our key employees are highly skilled and trained technical personnel. None of our employees is represented by a labor union, and we have never experienced a work stoppage. We believe that our relationship with our employees is very good.

ADDITIONAL INFORMATION

Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to these reports that are filed with the SEC pursuant to Section 13(a) or 15(d) of the Exchange Act, are available free of charge through our website (www.intest.com) as soon as reasonably practicable after we electronically file them with, or furnish them to, the SEC.

The following are some of the factors that could materially and adversely affect our future performance or could cause actual results to differ materially from those expressed or implied in our forward-looking statements. The risks and uncertainties described below are not the only ones facing us and we cannot predict every event and circumstance that may adversely affect our business. However, these risks and uncertainties are the most significant factors that we have identified at this time. If one or more of these risks actually occurs, our business, results of operations, and financial condition would likely suffer, and the price of our stock would be negatively affected.

Our sales reflect the cyclicality of the semiconductor industry, which causes our operating results to fluctuate significantly.

Our business depends in significant part upon the capital expenditures of semiconductor manufacturers. Capital expenditures by these companies depend upon, among other things, the current and anticipated market demand for semiconductors and the products that utilize them. Typically, semiconductor manufacturers curtail capital expenditures during periods of economic downtown. Conversely, semiconductor manufacturers increase capital expenditures when market demand requires the addition of new or expanded production capabilities or the reconfiguration of existing fabrication facilities to accommodate new products. These market changes have contributed in the past, and will likely continue to contribute in the future, to fluctuations in our operating results.

We believe current industry forecasts and recent trends in our orders and sales activity suggest we have entered the next downturn. If we have entered the next downturn, we cannot be certain how long this downturn will last or what the rate of increase or decrease in our orders and net revenues will be in any future period. Any decline in our customers' markets or in general economic conditions would likely result in a reduction in demand for our products and could harm our consolidated financial position, results of operations, cash flows and stock price. Conversely, if the current downturn were to end and we were to enter the next up-cycle we may require additional debt or equity financing to meet working capital requirements or capital expenditure needs. We cannot be sure that such financing will be available when required or on what terms such financing would be available.

If we are not able to control our operating expenses during a cyclical downturn, or if an upturn is more rapid than we anticipate, we may not have sufficient cash to operate our businesses.

In recent years, we have implemented cost controls and restructured our operations with the goal of significantly reducing our fixed operating costs to position ourselves to more effectively meet the needs of the fluid ATE market. If a downturn in the industry is more severe than we have planned for, or if we are not able to control our operating expenses, the level of our cash may not be sufficient to operate our businesses. Conversely, if an upturn is stronger than we plan for, we may need additional cash to finance our working capital needs or for capital expenditures. We cannot determine with certainty that, if needed, we would be able to raise additional funding through either equity or debt financing under these circumstances or on what terms such financing would be available.

Our operating results often change significantly from quarter to quarter and may cause fluctuations in our stock price.

During the last several years, our operating results have fluctuated significantly from quarter to quarter. We believe that these fluctuations occur primarily due to the cycles of demand in the semiconductor manufacturing industry. In addition to the changing cycles of demand in the semiconductor manufacturing industry, other factors that have caused our quarterly operating results to fluctuate in the past, and that may cause fluctuations or losses in the future, include:

Because the market price of our common stock has tended to vary based on, and in relation to, changes in our operating results, fluctuations in the market price of our stock are likely to continue as variations in our quarterly results continue.

Our customers' purchasing patterns are erratic and can result in fluctuations in our backlog and quarterly results.

Our backlog at December 31, 2006 was $4.8 million compared to $6.0 million at December 31, 2005. Our backlog at the beginning of a quarter typically does not include all orders necessary to achieve our sales objectives for that quarter. Orders in our backlog are subject to cancellation, delay or rescheduling by our customers with limited or no penalties or ability to collect bill back amounts. Throughout recent years, we have experienced customer-requested shipment delays and order cancellations, and we believe it is probable that orders will be cancelled and/or delayed in the future. In addition, during a downturn, some of our customers may rely on short lead times generally available from suppliers, including us, whereas in periods of stronger demand, and longer lead times, customers need to book orders earlier.

We have experienced varying levels of product warranty costs in recent periods and cannot predict the level of such costs that we may incur in future periods.

We accrue product warranty charges quarterly, based upon our historical claims experience. In addition, from time to time, we accrue additional amounts based upon known product warranty issues, such as product retrofits. For the years ended December 31, 2006, 2005 and 2004, our product warranty charges were $378,000, $549,000 and $2.0 million, or 0.6%, 1.0% and 2.8% of net revenues, respectively. The level of our product warranty charges both in absolute dollars and as a percentage of net revenues is affected by a number of factors including the cyclicality of demand in the ATE industry, the prototype nature of much of our business, the complex nature of many of our products, the introduction of new product "families" which typically have higher levels of warranty claims than existing product families and, at our discretion, providing warranty repairs or replacements to customers after the contractual warranty period has expired in order to promote strong customer relations. If our products have reliability, quality or other problems, or the market perceives our products to be deficient, we may suffer reduced orders, higher manufacturing costs, delays in collecting accounts receivable and higher service, support and warranty expenses.

Changes in securities laws and regulations are likely to increase our costs of compliance with such laws and regulations.

The Sarbanes-Oxley Act of 2002 has required changes in some of our corporate governance procedures and our disclosure and compliance practices. That Act also required the SEC to promulgate new rules on a variety of subjects, in addition to rule proposals the SEC had already made, and which NASDAQ revised, and continues to revise, for companies that are listed on NASDAQ. These developments have increased our legal compliance and financial reporting costs. Additional recent changes and future changes in securities regulations are expected to continue to affect our costs. In order to comply with certain requirements of the Sabanes-Oxley Act, such as the internal control system requirements of Section 404 of the Act, we have incurred, and expect to incur significant additional expenses in future periods to comply with these new requirements. We are presently evaluating and monitoring regulatory developments and cannot estimate the timing or magnitude of additional costs we may incur as a result.

- 12 -

While we believe we currently have adequate internal controls over financial reporting, we are in the process of developing an assessment protocol as required by Section 404 of the Sarbanes-Oxley Act of 2002 ("Section 404") and will be required to assess our internal controls over financial reporting on an annual basis in accordance with Section 404 for the year ending December 31, 2007. Any adverse results from such an assessment could result in a loss of investor confidence in our financial reports and have an adverse effect on our stock price.

Section 404 and the accompanying rules and regulations promulgated by the SEC to implement it require us to include in our Form 10-K for the year ending December 31, 2007, an annual report by our management regarding the effectiveness of our internal controls over financial reporting. The report must include, among other things, an assessment of the effectiveness of our internal controls over financial reporting as of the end of that fiscal year and disclosure of any material weaknesses in our internal controls over financial reporting identified by management. During our assessment process, if our management identifies one or more material weaknesses in our internal controls over financial reporting that cannot be remediated in a timely manner, we may be unable to assert that our internal controls are effective. While we currently believe our internal controls over financial reporting are effective, the effectiveness of our internal controls in future periods is subject to the risk that our control s may become inadequate because of changes in conditions, and, as a result, the degree of effectiveness of our internal controls over financial reporting may deteriorate. If we are unable to assert that our internal controls over financial reporting are effective as of December 31, 2007 or any later date, we could lose investor confidence in the accuracy and completeness of our financial reports, which could have an adverse effect on our stock price.

We seek to acquire additional businesses. If we are unable to do so, our future rate of growth may be reduced or limited.

A key element of our growth strategy is to acquire businesses, technologies or products that expand and complement our current businesses. We may not be able to execute our acquisition strategy if:

Our acquisition strategy involves financial and management risks which may adversely affect our earnings in the future.

If we acquire additional businesses, technologies or products, we will face the following additional risks:

If any of the events described above occur, our earnings could be reduced. If we issue shares of our stock or other rights to purchase our stock in connection with any future acquisitions, we would dilute our existing stockholders' interests and our earnings per share may decrease. If we issue debt in connection with any future acquisitions, lenders may impose covenants on us which could, among other things, restrict our ability to increase capital expenditures or to acquire additional businesses.

Our industry is subject to rapidly evolving technological change, and our business prospects would be negatively affected if we are unable to respond to innovation in the semiconductor industry.

Semiconductor technology continues to become more complex as manufacturers incorporate ICs into an increasing variety of products. This trend, and the rapid changes needed in automatic testing systems to respond to developments in the semiconductor industry, are likely to continue. We cannot be certain that we will be successful in developing, manufacturing or selling products that will satisfy customer needs or attain market acceptance. Our failure to provide products that meet customer needs or gain market acceptance will negatively affect our business prospects.

If we are not able to obtain patents on or otherwise preserve and protect our proprietary technologies, our business may suffer.

We have obtained domestic and foreign patents covering some of our products which expire between the years 2007 and 2022, and we have applications pending for additional patents. Some of our products utilize proprietary technology that is not covered by a patent or similar protection, and, in many cases, cannot be protected. We cannot be certain that:

If we cannot obtain patent or other protection for our proprietary technologies, our ability to compete in our markets could be impaired.

Claims of intellectual property infringement by or against us could seriously harm our businesses.

From time to time, we may be forced to respond to or prosecute intellectual property infringement claims to defend or protect our rights or a customer's rights. These claims, regardless of merit, may consume valuable management time, result in costly litigation or cause product shipment delays. Any of these factors could seriously harm our business and operating results. We may have to enter into royalty or licensing agreements with third parties who claim infringement. These royalty or licensing agreements, if available, may be costly to us. If we are unable to enter into royalty or licensing agreements with satisfactory terms, our business could suffer. In instances where we have had reason to believe that we may be infringing the patent rights of others, or that someone may be infringing our patent rights, we have asked our patent counsel to evaluate the validity of the patents in question, as well as the potentially infringing conduct. If we become involved in a dispute, neither the third parties nor the courts are bound by our counsel's conclusions.

Our business will suffer if we cannot compete successfully with manufacturers whose products are similar to ours.

We compete with numerous manufacturers, many of whom have greater financial resources and more extensive design and production capabilities than we do. Some of our principal competitors in the sale of manipulator, docking and tester interface products are Reid-Ashman Manufacturing Inc., Microhandling GmbH, Esmo AG, Credence Systems Corp., LTX Corporation, Teradyne Inc. and Xandex Inc. Some of our principal competitors in the sale of temperature management products are Thermonics Inc., ERS Elektronik GmbH and Advances Temperature Test Systems GmbH. In order to remain competitive with these and other companies, we must be able to continue to commit a significant portion of our personnel, financial resources, research and development and customer support to developing new products and maintaining customer satisfaction worldwide. If we are not able to compete successfully, our business will suffer.

We generate a large portion of our sales from a small number of customers. If we were to lose one or more of our large customers, operating results could suffer dramatically.

Texas Instruments Inc. accounted for 19%, 16% and 16% of our consolidated net revenues in 2006, 2005 and 2004, respectively. Teradyne Inc. accounted for 11% of our net consolidated revenues in 2004. While all three of our operating segments sold to these customers, these revenues were primarily generated by our manipulator/docking hardware and tester interface segments. Our ten largest customers accounted for approximately 59%, 56% and 62% of our net revenues in 2006, 2005 and 2004, respectively. The loss of any one or more of our largest customers, or a reduction in orders by a major customer, could materially reduce our net revenues or otherwise materially affect our business, financial condition or results of operations.

Significant fluctuations in our net revenues strain our management, employees and other resources.

Over the last several years, we have experienced significant fluctuations in our net revenues due to the cyclical nature of the ATE industry. As a result of the decline in business activity during the second half of 2006, we believe that we have entered another downturn in the ATE industry. Our consolidated net revenues were $13.2 million for the fourth quarter of 2006, a

decline of 30% from the level recorded in the second quarter of the year, which we now believe to be the peak of the last up-cycle. During the most recent downturn prior to this, our net revenues declined from a peak of $22.7 million in the second quarter of 2004 to $10.7 million in the first quarter of 2005, a decline of 53%. Conversely, in previous up-cycles, our net revenues have increased significantly period-over-period. As a result of these sometimes sudden and significant changes in our market, we have implemented cost controls, including salary and benefit reductions, and restructured our operations. These fluctuations in our net revenues, restructurings and compensation changes place strain on our management, employees and other resources.

If we do not continue to retain the services of key personnel, relationships with, and sales to, some of our customers could suffer, which could have a negative impact on our business.

The loss of key personnel could adversely affect our ability to manage our business effectively. Our future success will depend largely upon the continued services of our senior management and certain other key employees. We do not have employment agreements with any of our executive officers or other key employees. Our future success will depend, in part, upon our ability to retain our managers, engineers and other key employees. Our business could suffer if we were unable to retain one or more of our senior officers or other key employees.

A substantial portion of our operations exists outside the U.S., which exposes us to foreign political and economic risks.

We have operated internationally for many years and expect to expand our international operations as necessary to continue expansion of our sales and service to our non-U.S. customers. Our foreign subsidiaries generated 32% and 31% of consolidated net revenues in 2006 and 2005, respectively. Export sales from our U.S. manufacturing facilities totaled $16.8 million, or 27% of consolidated net revenues, in 2006 and $14.9 million, or 28% of consolidated net revenues, in 2005. The portion of our consolidated net revenues that were derived from sales by our subsidiaries in the Asia-Pacific region was 23% in 2006 and 20% in 2005. We expect our international revenues will continue to represent a significant portion of total net revenues. However, in addition to the risks generally associated with sales and operations in the U.S., sales to customers outside the U.S. and operations in foreign countries are subject to additional risks, which may, in the future, affect our operations. These risks include:

We conduct business in foreign currencies, and fluctuations in the values of those currencies could result in foreign exchange losses.

In 2006, approximately 11% of our net revenues were denominated in Japanese yen and approximately 10% were denominated in Euros. During 2006, we recorded foreign exchange currency transaction gains of $23,000. Future fluctuations in the value of the Japanese Yen or the Euro could result in foreign exchange gains or losses. Any strengthening of the U.S. dollar in relation to the currencies of our competitors or customers, or strengthening or weakening of the Japanese yen or Euro in relation to other currencies in which our customers or competitors do business, could adversely affect our competitiveness. Moreover, a strengthening of the U.S. dollar or other competitive factors could put pressure on us to denominate a greater portion of our sales in foreign currencies, thereby increasing our exposure to fluctuations in exchange rates. Any devaluation of these currencies would hurt our business. We do not undertake hedging activities against the majority of our exchange rate risk. Fluctuations in exchange rates may adversely affect our competitive position or result in foreign exchange losses, either of which could cause our business to suffer.

None.

At December 31, 2006, we leased 9 facilities worldwide. The following chart provides information regarding each of our principal facilities which we occupied at December 31, 2006.

From time to time we may be a party to legal proceedings occurring in the ordinary course of business. We are not currently involved in any material legal proceedings.

No matters were submitted to our stockholders for a vote during the fourth quarter of 2006.

Our common stock is traded on NASDAQ under the symbol "INTT." The following table sets forth the high and low sale prices of our common stock, as reported on the NASDAQ Global Market, for the periods indicated. Sale prices have been rounded to the nearest full cent.

inTEST CORPORATON
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2006

The following table contains certain selected consolidated financial data of inTEST and is qualified by the more detailed Consolidated Financial Statements and Notes thereto included elsewhere in this Annual Report on Form 10-K and should be read in conjunction with "Management's Discussion and Analysis of Financial Condition and Results of Operations" and the other financial information included in this Annual Report on Form 10-K.

Overview

Our business and results of operations are substantially dependent upon the demand for ATE by semiconductor manufacturers and companies that specialize in the testing of ICs. Demand for ATE is driven by semiconductor manufacturers that are opening new, or expanding existing, semiconductor fabrication facilities or upgrading existing equipment, which in turn is dependent upon the current and anticipated market demand for semiconductors and products incorporating semiconductors. In the past, the semiconductor industry has been highly cyclical with recurring periods of oversupply, which often have a severe impact on the semiconductor industry's demand for ATE, including the products we manufacture. This can cause wide fluctuations in both our orders and net revenues and, depending on our ability to react quickly to these shifts in demand, can significantly impact our results of operations. These industry cycles are difficult to predict. Because the industry cycles are generally characterized by sequential quart erly growth or declines in orders and net revenues throughout the cycle, year over year comparisons of operating results may not always be as meaningful as comparisons of periods at similar points in either up or down cycles. In addition, during both downward and upward cycles in our industry, while the general trend over several quarters tends to be one of either growth or decline, in any given quarter, the trend in both our orders and net revenues can be erratic. This can occur, for example, when orders are canceled or currently scheduled delivery dates are accelerated or postponed by a significant customer or when customer forecasts and general business conditions fluctuate during a quarter.

We believe that purchases of most of our products are typically made from semiconductor manufacturers' capital expenditure budgets. Certain portions of our business, however, are generally less dependent upon the capital expenditure budgets of the end users. For example, purchases of certain related ATE interface products, such as sockets and interface boards, which must be replaced periodically, are typically made from the end users' operating budgets. In addition, purchases of certain of our products, such as docking hardware, for the purpose of upgrading or improving the utilization, performance and efficiency of existing ATE, tend to be counter cyclical to sales of new ATE. Moreover, we believe a portion of our sales of temperature management systems results from the increasing need for temperature testing of circuit boards and specialized components that do not have the design or quantity to be tested in an electronic device handler. In addition, in recent years we have begun to market our temperature m anagement systems in industries outside semiconductor test, such as the automotive, aerospace, medical and telecommunications industries. We believe that these industries usually are less cyclical than the ATE industry.

Net Revenues and Orders

The following table sets forth, for the periods indicated, a breakdown of the net revenues from unaffiliated customers both by product segment and geographic area (based on the location of the selling entity).

Our consolidated net revenues for the year ended December 31, 2006 increased $9.0 million or 17% as compared to 2005. During 2006, our consolidated net revenues peaked during the second quarter of the year when they totaled $18.9 million. During both the third and fourth quarters of 2006, our quarterly consolidated net revenues declined with net revenues during the third quarter totaling $16.6 million, and net revenues in the fourth quarter totaling $13.2 million. We attribute the strength in the second quarter of 2006 in part to the fact that we had several customers place large orders which were booked and shipped during the second quarter. In addition, we believe the industry up cycle peaked during the second quarter of 2006. The subsequent declines we experienced during the balance of the year in the levels of both our orders and net revenues were more significant in our manipulator/docking hardware and tester interface product segments than for our temperature management segment where we have continu ed to experience increased success in selling these products in markets which we believe to be less cyclical than the semiconductor test industry. Partially offsetting the decline in net revenues within our manipulator/docking hardware product segment during the second half of 2006 was continued strong demand for certain third-party products we distribute through our operation in Japan, which is included in this segment.

Total orders for the year ended December 31, 2006 increased to $61.2 million on a consolidated basis as compared to $53.6 million for 2005. For our manipulator/docking hardware, temperature management and tester interface product segments, total orders for 2006 were $33.9 million, $20.7 million and $6.6 million, respectively compared to $29.0 million, $17.9 million and $6.7 million, respectively, for 2005. Similar to the trend in our net revenues, the second quarter of 2006 represented the peak for our orders during the year with total orders of $20.4 million on a consolidated basis. For the third and fourth quarters of 2006, our orders declined to $13.0 million and $12.2 million, respectively. We believe the decline in our orders during the second half of 2006 indicates that we are in the down portion of this business cycle. We cannot be certain what the level of our orders or net revenues will be in any future period.

Backlog

At December 31, 2006, our backlog of unfilled orders for all products was approximately $4.8 million compared with approximately $6.0 million at December 31, 2005. Our backlog includes customer orders which we have accepted, substantially all of which we expect to deliver in 2007. While backlog is calculated on the basis of firm purchase orders, a customer may cancel an order or accelerate or postpone currently scheduled delivery dates. Our backlog may be affected by the tendency of customers to rely on short lead times available from suppliers, including us, in periods of depressed demand. In periods of increased demand, there is a tendency towards longer lead times that has the effect of increasing backlog. As a result, our backlog at a particular date is not necessarily indicative of sales for any future period.

Cost Containment and Organizational Changes

In response to the cyclical nature of the ATE market in which we operate, we have taken various actions to restructure our operations in recent years. The goal of these actions was to significantly reduce our fixed operating costs and position ourselves to more effectively meet the needs and expectations of the cyclical ATE market. The most recent actions (during late 2004 and 2005) included organizational changes which allowed us to eliminate certain central corporate staff as well as workforce reductions and facility closures which allowed us to eliminate excess manufacturing capacity at certain of our locations. In addition, during periods of significant weakened demand, such as in late 2004, we also implemented headcount reductions and salary and benefit adjustments as temporary cost-saving measures which we have reinstated as warranted by increases in our sales levels and profitability. This includes the restoration on April 1, 2006, of the salaries for certain staff in our manipulator/docking hardware product segment which had been reduced in late 2004. In addition, on July 1, 2006, we reinstated our employer 401(k) matching contribution and increased salaries for most of our domestic staff, the majority of whom had not had salary increases in two years. Total 401(k) employer match expense incurred in 2006 was $242,000. Additional information regarding the various restructuring plans implemented in recent years, including the costs incurred, is set forth in Note 10 to the consolidated financial statements.

As of December 31, 2005, the only restructuring plan which was not completed was the closure of our U.K. manufacturing operation. We announced the closure of this operation in mid-March 2005 and ceased manufacturing operations at this facility during the second quarter of 2005. In November 2006, we entered into an agreement to sub-lease the facility where this operation had been located. During the fourth quarter of 2006, we finalized this sub-leasing arrangement. As of December 31, 2006, there are no accruals remaining related to the closure of this operation as all aspects of the closure are now complete. As

a part of the sub-lease agreement, however, we remain obligated for the lease payments in the event the sub-lessee defaults. This guaranty obligation is more fully discussed below in the Liquidity and Capital Resources section. Our U.K. operation is included in our Manipulator/Docking Hardware segment.

We believe the actions taken in recent years to reorganize and decentralize our operations have made us a more competitive company and have positioned us to adapt more quickly to new market challenges and opportunities through continued research and development as well as strategic merger and acquisition activities. As part of our continuing focus to determine methods to increase our profitability worldwide while operating in the cyclical ATE market, we intend to continue reviewing and evaluating actions that could better match our operating costs against our anticipated future revenue and product demand as we pursue additional growth opportunities.

Excess and Obsolete Inventory Charges

On a quarterly basis, we review our inventories and record charges for excess and obsolete inventory based upon our established objective excess and obsolete inventory criteria. These criteria identify material that has not been used in a work order during the prior twelve months and the quantity of material on hand that is greater than the average annual usage of that material over the prior three years. In certain cases, additional excess and obsolete inventory charges are recorded based upon current industry conditions, anticipated product life cycles, new product introductions and expected future use of the inventory. The excess and obsolete inventory charges we record establish a new cost basis for the related inventory. See also the section entitled "Critical Accounting Policies."

We incurred charges for excess and obsolete inventory of $431,000, $1.0 million and $1.4 million for the years ended December 31, 2006, 2005 and 2004, respectively. The level of these charges was based upon a variety of factors, including changes in demand for our products and new product designs. The downward trend in our excess and obsolete inventory charges has been driven by a number of factors, including the stronger demand for our products during the recent up-cycle as well as more efficient inventory management. The charges for 2005 included approximately $173,000 related to the remaining inventory located at our U.K. manufacturing operation which was closed as of June 30, 2005, as previously discussed. The higher level of inventory obsolescence charges during 2004 was primarily the result of customer order cancellations after we had already purchased inventory to fulfill the orders and where that inventory could not be used in other products we manufacture due to its highly customized nature. In addi tion during 2004, we had increases in our reserves for excess quantities related to materials that were purchased based upon forecasted orders which did not materialize. During the fourth quarter of 2004, management made the determination to curtail the practice of purchasing significant amounts of inventory against forecasted orders due to the increased level of uncertainty in our current business outlook. However, in the future, we may determine that it is appropriate to increase the level of such purchases based on a variety of factors, including, but not limited to, general market conditions and the specific delivery requirements of our customers. See also the section entitled "Critical Accounting Policies."

During the years ended December 31, 2006, 2005 and 2004 we utilized $335,000, $239,000 and $173,000, respectively, of material in production that had been written off as obsolete in prior periods. When previously written off inventory material is used in production, it has a zero cost basis and as a result, has the impact of improving our gross margin in the period used. For the years ended December 31, 2006, 2005 and 2004, the use of previously obsoleted inventory materials did not materially change our gross margin.

Product Warranty Charges

We accrue product warranty charges quarterly, based upon our historical claims experience. In addition, from time to time, we accrue additional amounts based upon known product warranty issues, such as product retrofits. For the years ended December 31, 2006, 2005 and 2004, our product warranty charges were $378,000, $549,000 and $2.0 million, or 0.6%, 1.0% and 2.8% of net revenues, respectively. The downward trend in our product warranty charges has been driven by a number of factors including recent improvements in product quality as well as the fact that there were no introductions of new product families in 2006 and 2005 in our manipulator/docking hardware segment. The higher levels of product warranty charges in 2004 were the result of specific product retrofits and other costs associated with several products we sold to certain ATE manufacturers. There were no similar known product retrofit warranty issues for which we needed to record additional specific product warranty accruals in 2006 or 20 05.

inTEST CORPORATON
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2006

The level of our product warranty charges both in absolute dollars and as a percentage of net revenues is affected by a number of factors including the cyclicality of demand in the ATE industry, the prototype nature of much of our business, the complex nature of many of our products, the introduction of new product families which typically have higher levels of warranty claims than existing product families, and, at our discretion, providing warranty repairs or replacements to customers after the contracted warranty period has expired in order to promote strong customer relations. See also "Critical Accounting Policies."


Product/Customer Mix

Our three product segments each have multiple products that we design, manufacture and sell to our customers. The gross margin on each product we offer is impacted by a number of factors including the amount of intellectual property (such as patents) utilized in the product, the number of units ordered by the customer at one time, or the amount of inTEST designed and fabricated material included in our product compared with the amount of third-party designed and fabricated material included in our product. The weight of each of these factors, as well as the current market conditions, determines the ultimate sales price we can obtain for our products and the resulting gross margin.

The mix of products we sell in any period is ultimately determined by our customers' needs. Therefore, the mix of products sold in any given period can change significantly from the prior period. As a result, our consolidated gross margin can be significantly impacted in any given period by a change in the mix of products sold in that period.

We sell our products to both semiconductor manufacturers (end user sales) and to ATE manufacturers (OEM sales) who ultimately resell our equipment with theirs to semiconductor manufacturers. The mix of customers during any given period will affect our gross margin due to differing sales discounts and commissions. For the years ended December 31, 2006, 2005 and 2004, our OEM sales as a percentage of net revenues were 23%, 22% and 39%, respectively.

The impact of an increase in OEM sales as a percentage of net revenues is generally a reduction in our gross margin, as OEM sales historically have had a more significant discount than end user sales. Our current net operating margins on most OEM sales for these product segments, however, are only slightly less than margins on end user sales because of the payment of third party sales commissions on most end user sales. We also expect to continue to experience demands from our OEM customers' supply line managers to reduce our sales prices to them. This continued price pressure may have the ultimate effect of reducing our gross and operating margins if we cannot further reduce our manufacturing and operating costs.


Risk Factors

Please see Item 1A "Risk Factors" for a discussion of other important factors that could cause our results to differ materially from our prior results or those expressed or implied by our forward-looking statements.


Results of Operations

All of our products are used by semiconductor manufacturers in conjunction with ATE in the testing of ICs. Consequently, the results of operations for each product segment are generally affected by the same factors. Separate discussions and analyses for each product segment would be repetitive and obscure any unique factors that affected the results of operations of our different product segments. The discussion and analysis that follows, therefore, is presented on a consolidated basis for the Company as a whole and includes discussion of factors unique to each product segment where significant to an understanding of each segment.

The following table sets forth for the periods indicated the principal items included in the "Consolidated Statements of Operations" as a percentage of total net revenues.

inTEST CORPORATON
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2006

to 2005 led to the overall decrease in fixed operating costs as a percentage of net revenues from 19% in 2005 to 16% in 2006. Our excess and obsolete inventory charges totaled $431,000, or less than 1% of net revenues, for 2006 as compared to $1.0 million, or 2% of net revenues, for 2005. We attribute the reduction in excess and obsolete inventory charges primarily to our continued efforts to more closely manage our inventory levels and purchasing policies to minimize our risk in this area.

Selling Expense. Selling expense was $9.0 million for 2006 compared to $8.9 million for 2005, an increase of $27,000 or less than 1%. During 2006, there were increases in travel costs, fees paid to third parties for installation of our products at customer sites, primarily in Asia, and sales commissions. The increase in travel costs primarily reflects more overseas trips to visit various customers in Asia and Europe. The increase in installation costs primarily represents instances where our internal sales people were not available to perform an installation at a customer site. In these situations, our practice is to hire a third party to perform the installation for us. As our overseas business has grown, we have experienced more instances where we do not have internal sales personnel readily available to perform installations overseas. The increase in sales commissions reflects the increase in the level of sales during 2006 as compared to 2005. These increases were offset primarily by decreases in e xpenditures related to certain limited duration marketing programs that were in place in early 2005 in our temperature management product segment, lower levels of product warranty expense, and a reduction in expenditures for demonstration equipment in 2006 as compared to 2005.

Engineering and Product Development Expense. Engineering and product development expense was $5.4 million for 2006 compared to $5.9 million for 2005, a decrease of $502,000 or 8%. We attribute the decrease primarily to the receipt of reimbursement payments totaling $700,000 during the first half of 2006 for engineering services under a contract with one of the customers of our tester interface product segment. Under this contract we received payments based on achieving various milestones (as defined in the contract) related to specified product redesign activities. This contract ended during the second quarter of 2006, and no further payments will be received. In addition, expenditures for third-party consultants decreased during 2006 as compared to 2005. These third-party consultants had been retained to assist in new product development efforts during 2005 for our tester interface product segment. These decreases were offset primarily by higher salary and benefits expense and increased spending on r esearch and development materials during 2006 as compared to 2005. The increase in salary and benefits expense was due to hiring additional staff at our tester interface and temperature management product segments as well as the restoration of certain salaries and benefits. The increase in staff at our tester interface product segment primarily related to the engineering services contract previously discussed. When this contract ended, certain staff members were either terminated or, in some cases, re-assigned to other projects. The increase in spending on research and development materials was related to various new product development projects primarily in our temperature management and manipulator/docking hardware product segments.

General and Administrative Expense. General and administrative expense was $8.5 million for 2006 compared to $7.8 million for 2005, an increase of $610,000 or 8%. The increase was primarily driven by an increase in salary and benefits expense which reflects the restoration of certain salaries and benefits in April and July 2006, as previously mentioned, as well as the hiring of some additional staff. To a lesser extent, we incurred additional professional fees related to audit, tax and other compliance work where we utilize the assistance of third party professionals. The increase in these fees primarily reflects the growing number and complexity of the various accounting and other compliance matters that we encounter in the normal course of running our business. Finally, the amount of performance-based bonuses we accrued in 2006 increased as compared to 2005 which reflects our positive results for 2006.

Restructuring and Other Charges. Restructuring and other charges were $23,000 for 2006 compared to $572,000 for 2005, a decrease of $549,000. The restructuring and other charges recorded during 2006 related to finalizing the sub-lease agreement for the facility where our U.K. manufacturing operation was located prior to its closure in mid-2005. The restructuring and other charges recorded during 2005 consisted of $234,000 in severance and related costs and $303,000 in lease termination costs resulting from the closure of this same operation. In addition, we incurred $35,000 in severance and related costs associated with a workforce reduction at our facility in San Jose, California in 2005.

Other Income. Other income was $470,000 for 2006 compared to $124,000 for 2005, an increase of $346,000. The increase primarily reflects higher interest income, which was the result of both higher average cash balances and an increase in the rate of return earned on such balances, combined with a reduction in foreign exchange transaction losses. The reduction in foreign exchange transaction losses was primarily the result of a $167,000 foreign currency translation adjustment related to the final dissolution of our U.K. operation which was completed during the fourth quarter of 2006.

Income Tax Expense. For 2006, we recorded income tax expense of $1.1 million compared to $236,000 for 2005. Our effective tax rate was 28% for 2006 compared to (7)% for 2005. The increase in our effective tax rate during 2006 as compared to 2005 reflects that a higher proportion of our taxable income for 2006 was generated by certain of our foreign operations where we do not have a history of operating losses and therefore do not have net operating loss carryforwards to offset income tax expense on those earnings. In addition, during 2005 we recorded an income tax benefit related to a domestic income tax refund we received during the year. Due to our history of operating losses in our other operations, we have recorded a full valuation allowance against all domestic and certain foreign deferred tax assets, including net operating loss carryforwards, where we believe it is more likely than not that we will not have sufficient taxable income to utilize these assets before they expire.

Year Ended December 31, 2005 Compared to Year Ended December 31, 2004

Net Revenues. Net revenues were $53.4 million for 2005 compared to $71.2 million for 2004, a decrease of $17.9 million or 25%. Late in the third quarter of 2004, we began to see a decline in demand, and we believe the decrease in our net revenues for 2005 reflects the weaker cyclical demand during 2005 as compared to most of 2004. For 2005, the net revenues (net of intersegment sales) of our manipulator/docking hardware, temperature management and tester interface segments decreased $9.5 million or 25%, $2.9 million or 14% and $5.5 million or 46%, respectively, over the comparable period in 2004. We believe the larger percentage decreases in our manipulator/docking hardware and tester interface segments reflect the decreased production requirements of our customers during 2005, and that the smaller percentage decrease in the sales of our temperature management segment reflects the fact that these products are used in less cyclical non-production environments, such as research and development laborator ies, as well as in industries outside of semiconductor test. The larger percentage decline in the net revenues of our tester interface segment also reflects increased competition during 2005. This led to significant downward pressure on pricing and, in some cases, we chose not to bid on business rather than sell at prices where we would not be assured of positive margins. Instead, this segment focused on new product development areas during 2005.

During 2005, our net revenues from customers in the U.S. and Europe decreased 32% and 18%, respectively, and our net revenues from customers in Asia increased 7% over the comparable period in 2004. The smaller percentage decline for our European customers reflects the fact that sales of temperature management products represent a higher percentage of our total European sales than they do of our domestic sales, and, as previously discussed, sales of our temperature management products have not been as significantly impacted by the weakened demand in the industry. In addition, the lower percentage decline in sales to European customers can also be attributed to the fact that the sales of our Intestlogic operation in southern Germany decreased only 5% in 2005 as compared to 2004. We believe this reflects strong customer acceptance of the products manufactured by this subsidiary. The increase for our customers in Asia primarily reflects an increase in sales of third party products by our Japanese subsidiary in 2 005 as compared to 2004.

Gross Margin. Gross margin was 37% for 2005 as compared to 41% for 2004. The decline in gross margin was primarily the result of our fixed operating costs not being as fully absorbed in 2005 due to the significantly lower net revenue levels as compared to 2004. As a percentage of net revenues, our fixed operating costs were 19% and 16% for 2005 and 2004, respectively. In absolute dollar terms, our fixed operating costs decreased $1.5 million during 2005 as compared to 2004. This decrease was primarily due to lower salary and benefits expense as a result of the cost containment initiatives we put into place during late 2004 and early 2005. This decrease was partially offset by a reduction in the utilization rates of our internal machine shop operations in both our Cherry Hill, New Jersey and our San Jose, California facilities, as well as an increase in our insurance premiums. Our component material costs were 39% for 2005 as compared to 38% for the comparable period in 2004. We attribute the increase in component material costs primarily to product mix. Our excess and obsolete inventory charges totaled $1.0 million, or 2% of net revenues, for 2005 as compared to $1.4 million, or 2% of net revenues, for 2004. Finally, although the absolute dollar value of direct labor decreased by $485,000 for 2005 as compared to 2004, as a percentage of net revenues, direct labor remained consistent at 3% for both years due to the significantly lower net revenue levels in 2005 as compared to 2004. We attribute the decrease in the absolute dollar value of direct labor to the aforementioned cost containment initiatives.

Selling Expense. Selling expense was $8.9 million for 2005 compared to $12.2 million for 2004, a decrease of $3.3 million or 27%. We attribute the decrease primarily to a $1.4 million decrease in product warranty costs as well as lower levels of commission expense. The decrease in product warranty costs is due in part to the fact that our warranty costs in 2004 included $531,000 in charges related to product retrofits and other costs associated with several products we sold to three ATE

inTEST CORPORATON
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2006

manufacturers. In addition, during the third quarter of 2004, we recorded charges of approximately $200,000 as a result of negative trends in our historical claims experience. There were no similar charges in 2005. Commission expense decreased $717,000, primarily due to the significantly lower net revenue levels. To a lesser extent, decreases in salary and benefits expense, travel expenses, freight and advertising also contributed to the decreased selling expense. The decreases in these expense categories reflect both the aforementioned cost containment initiatives as well as decreased business activity. These decreases were offset somewhat by an increase in marketing costs for our temperature management product segment for a specific program we implemented in 2005 related to our 300mm technology.

Engineering and Product Development Expense. Engineering and product development expense was $5.9 million for 2005 compared to $6.5 million for 2004, a decrease of $520,000 or 8%. We attribute the decrease primarily to an $898,000 reduction in salary and benefits expense. This reduction was primarily the result of the aforementioned cost containment initiatives. To a lesser extent there were also decreases in spending on travel and supplies. These decreases were partially offset by a $459,000 increase in the use of third party consultants, primarily by our tester interface product segment related to specific product development projects.

General and Administrative Expense. General and administrative expense was $7.8 million in each of 2005 and 2004. There were decreases in travel and information technology costs during 2005 as compared to the same period in 2004, which were offset by higher levels of incentive compensation expense related to grants of restricted stock. During 2004, we implemented a new company-wide enterprise resource planning system. The implementation process required significant additional travel and use of third party consultants to complete. The system implementation was completed in 2004; therefore, no charges associated with this process were recorded in 2005. In 2004, we began granting restricted stock awards as a form of incentive compensation for certain members of management and directors. The value of the shares granted is expensed over the four year vesting period. The level of expense in 2004 was significantly lower than in 2005 since the first grant of restricted stock was not made until the fourth quar ter of 2004.

Restructuring and Other Charges. Restructuring and other charges were $572,000 for 2005 compared to $627,000 for 2004, a decrease of $55,000 or 9%. As previously discussed, the restructuring and other charges recorded during 2005 consisted of $234,000 in severance and related costs and $303,000 in lease termination costs resulting from the closure of our U.K. manufacturing operation. In addition, we incurred $35,000 in severance and related costs associated with a workforce reduction at our facility in San Jose, California. The restructuring and other charges in 2004 consisted of severance costs of approximately $527,000 related to the reorganization of our domestic operations and long-lived asset impairments of $100,000 related to our U.K. facility.

Other Income (Expense). Other income was $124,000 for 2005 compared to other expense of $77,000 for 2004, an increase of $201,000. The increase reflects higher interest income due primarily to the receipt of $79,000 in interest related to a domestic income tax refund we received during 2005 combined with an $89,000 decrease in foreign exchange transaction losses during 2005 as compared to 2004.

Income Tax Expense. Income tax expense was $236,000 for 2005 compared to $398,000 for 2004. Our effective tax rate for 2005 was (7)% compared to 24% in 2004. Our income tax expense recorded during 2005 included a $243,000 tax benefit related to domestic income tax refunds we received during the second and third quarters of the year. This amount was offset by foreign income tax expense we recorded on the earnings of certain of our foreign operations where we do not have net operating loss carryforwards to offset income tax expense on those earnings. The income tax expense recorded during 2004 represents foreign income tax expense on the earnings of these same operations. We increased our valuation allowance against our net deferred tax assets by $644,000 and $213,000 in 2005 and 2004, respectively, due to taxable losses experienced in our domestic and certain foreign operations and the uncertainty surrounding whether we would be able to generate sufficient taxable income to fully utilize these net oper ating loss carryforwards before they expire.

inTEST CORPORATON
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2006

Liquidity and Capital Resources

Net cash provided by operations for the year ended December 31, 2006 was $6.4 million compared to $398,000 in 2005 bringing our cash and cash equivalents to $13.2 million at December 31, 2006. The increase in cash provided by operations in 2006 was primarily the result of $2.9 million of net income generated in 2006 compared to a $3.6 million net loss in 2005. Although net revenues for 2006 increased $9.0 million or 17% for the year as compared to 2005, accounts receivable decreased $724,000 at December 31, 2006 compared to December 31, 2005. This reflects the aforementioned slowdown in business activity in the second half of 2006. We had no significant change in the level of inventory on hand at December 31, 2006 compared to December 31, 2005, which we attribute both to the slowdown in business activity in late 2006 as well as stronger inventory management practices. Accounts payable increased $609,000 from December 31, 2005 to December 31, 2006 primarily due to the timing of payments for purchases made dur ing the fourth quarter of 2006 in our temperature management product segment and in our Japanese subsidiary. Accrued wages and benefits increased $387,000 as the result of increases in vacation accruals, performance-based bonus accruals and payroll withholdings related to the domestic 401(k) plan. Refundable domestic and foreign income taxes increased $512,000 from December 31, 2005 to December 31, 2006 as a result of accruing income taxes on the earnings of our foreign subsidiaries where we do not have net operating loss carryforwards to offset this expense, as previously discussed.

Purchases of machinery and equipment were $809,000 for the year ended December 31, 2006, consisting of $332,000 primarily for computer hardware, software and quality assurance equipment for our three domestic operations, $243,000 for demonstration equipment for our temperature management and tester interface divisions and $42,000 for additional leasehold improvements primarily for our tester interface facility in San Jose, California. The balance was primarily for machinery and equipment for our foreign locations.

We have no commitments for capital expenditures in 2007, however, depending upon changes in market demand, we will make such purchases as we deem necessary or appropriate.

Net cash provided by financing activities for the year ended December 31, 2006 was $145,000, which represented $169,000 of proceeds from stock options exercised and payments made under capital lease obligations of $24,000.

Our total committed contracts that will affect cash over the next five years and beyond are as follows:

In connection with the closure of our U.K manufacturing operation, we have entered into a sub-leasing arrangement for the facility which was occupied by this operation prior to its closure. As a condition of the sub-lease, the landlord of this facility has required that we guarantee the performance of the sub-lessee with respect to the lease payments. We have performed a credit analysis of the sub-lessee and believe that a default by them with regard to their obligations under the sub-lease agreement is remote. However, as of December 31, 2006, there was approximately $431,000 of future payments that we would be obligated to make if the sub-lessee were to default and we were unable to enter into a new sub-lease agreement with another party. Our original lease on this facility extends through December 31, 2010. As of December 31, 2006 we have not recorded any amounts in our financial statements related to this guarantee.

We have a secured credit facility that provides for maximum borrowings of $250,000. We have not utilized this facility to borrow any funds. Our usage consists of the issuance of letters of credit in the face amount of $250,000. We pay a quarterly fee of 1.5% per annum on the total amount of the outstanding letters of credit. The terms of the loan agreement require that we maintain a minimum level of $200,000 of domestic cash. This credit facility expires on September 30, 2007.

We believe that our existing cash balances plus the anticipated cash to be provided from operations will be sufficient to satisfy our cash requirements for the foreseeable future. As previously discussed, we believe we have entered another cyclical downturn in our industry and have experienced a decline in our orders and sales activity in the second half of 2006. We cannot be certain how long this downturn will last or what the rate of increases or decreases in our quarterly net revenues and bookings will be in any future period. As a result, we may require additional debt or equity financing to meet working capital or capital expenditure needs. We cannot be certain that, if needed, we would be able to raise such additional financing or upon what terms such financing would be available.

New or Recently Adopted Accounting Standards

See Note 2 to the consolidated financial statements for information concerning the implementation and impact of new or recently adopted accounting standards.

Critical Accounting Policies

The preparation of consolidated financial statements in conformity with U.S. GAAP requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to inventories, long-lived assets, goodwill, identifiable intangibles, deferred income tax valuation allowances and product warranty reserves. We base our estimates on historical experience and on appropriate and customary assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Some of these accounting estimates and assumptions are particularly sensitive because of their significance to our consolidated financial statements and because of the possibility that future events affecting them may differ ma rkedly from what had been assumed when the financial statements were prepared.

Inventory Valuation

Inventory is valued at standard cost, which approximates actual cost computed on a first-in, first-out basis, not in excess of market value. On a quarterly basis, we review our inventories and record excess and obsolete inventory charges based upon our established objective excess and obsolete inventory criteria. These criteria identify material that has not been used in a work order during the prior twelve months and the quantity of material on hand that is greater than the average annual usage of that material over the prior three years. In certain cases, additional charges for excess and obsolete inventory are recorded based upon current industry conditions, anticipated product life cycles, new product introductions and expected future use of the inventory. The charges for excess and obsolete inventory that we record establish a new cost basis for the related inventory. In 2006, we recorded an inventory obsolescence charge for excess and obsolete inventory of $431,000.

Long-Lived Asset Valuation

We assess the impairment of identifiable intangibles and long-lived assets whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Factors we consider important which could indicate impairment include significant underperformance relative to expected historical or projected future operating results, significant changes in the manner of our use of the asset or the strategy for our overall business and significant negative industry or economic trends. When we determine that the carrying value of intangibles and/or long-lived assets may not be recoverable based upon the existence of one or more of the above indicators of impairment, we prepare projections of operations for our product segments where these intangibles and/or long-lived assets are associated. If the carrying value of the intangible assets and/or long-lived assets exceeds the undiscounted cash flows per the projections, then we would record an impairment charge. We measure the impairment based upon the projected discounted cash flows using a discount rate determined by our management to be commensurate with the risk inherent in our current business model. At December 31, 2006 long-lived assets were $3.3 million and no asset impairments were recorded during 2006.

Goodwill

At least annually, we review our goodwill for impairment by comparing the fair value of our reporting units to their carrying values. If the result of this analysis indicates that an impairment charge is required, the fair value of the reporting unit is allocated to its identifiable tangible and intangible assets, resulting in an implied valuation of goodwill associated with the reporting unit. We would measure the impairment based on the difference between the implied valuation of the goodwill and its actual carrying value. During 2006, we did not record any impairment charges for goodwill or identifiable intangibles. Goodwill and intangible assets totaled $2.9 million at December 31, 2006.

Income Taxes

Deferred tax assets are analyzed to determine if there will be sufficient taxable income in the future in order to realize such assets. We assess all of the positive and negative evidence concerning the realizability of the deferred tax assets, including our historical results of operations for the recent past and our projections of future results of operations, in which we make subjective determinations of future events. If, after assessing all of the evidence, both positive and negative, a determination is made that the realizability of the deferred tax assets is not more likely than not, we establish a deferred tax valuation allowance for all or a portion of the deferred tax assets depending upon the specific facts. If any of the significant assumptions were changed, materially different results could occur, which could significantly change the amount of the deferred tax valuation allowance established. As of December 31, 2006, due to our history of operating losses, we have a 100% valuation allowance aga inst all deferred tax assets, including net operating loss carryforwards, where we believe it is more likely than not that we will not have sufficient taxable income to utilize these assets before they expire.

Product Warranty Accrual

In connection with the accrual of warranty costs associated with our products, we make assumptions about the level of product failures that may occur in the future. These assumptions are primarily based upon historical claims experience. Should the rate of future product failures significantly differ from historical levels, our accrued warranty reserves would need to be adjusted, and the amount of the adjustment could be material. At December 31, 2006 accrued warranty was $857,000 and we incurred product warranty costs of $378,000 for the year then ended.

As currency exchange rates change, translation of the statements of operations of our international businesses into U.S. dollars affects year-over-year comparability of operating results.  We do not hedge operating translation risks because cash flows from international operations are generally reinvested locally. Changes in foreign currency exchange rates are generally reported as a component of stockholders' equity as all of our foreign subsidiaries report in their local currencies. Total other comprehensive income (loss) was $372,000, ($812,000) and $571,000 in 2006, 2005 and 2004, respectively, due to cumulative translation adjustments.

As of December 31, 2006 and 2005, our net current assets (defined as current assets less current liabilities) subject to foreign currency translation risk were $5.1 million and $3.4 million, respectively.  The potential decrease in net current assets from a hypothetical 10% adverse change in quoted foreign currency exchange rates would be $508,000 and $339,000, respectively.  The sensitivity analysis presented assumes a parallel shift in foreign currency exchange rates.  Exchange rates rarely move in the same direction.  This assumption may overstate the impact of changing exchange rates on individual assets and liabilities denominated in a foreign currency.

Interest Rate Risk

As of December 31, 2006, we had cash and cash equivalents of $13.2 million. We generally place our investments in U.S. Treasury obligations or money market funds backed by such investments. We have not held and do not hold any derivatives related to our interest rate exposure. Due to the average maturity and conservative nature of our investment portfolio, a sudden change in interest rates would not have a material effect on the value of the portfolio. Management estimates that had the average yield of our investments decreased by 100 basis points, our interest income for year ended December 31, 2006 would have decreased by less than $103,000. This estimate assumes that the decrease occurred on the first day of 2006 and reduced the yield of each investment by 100 basis points. The impact on our future interest income of future changes in investment yields will depend largely on the gross amount of our cash, cash equivalents and short-term investments. See "Liquidity and Capital Resources" as part of Manageme nt's Discussion and Analysis of Financial Condition and Results of Operations.

Consolidated financial statements are set forth in this Report beginning at page F-1 and are incorporated by reference into this Item 8.

None.

CEO and CFO Certifications. Included with this Annual Report as Exhibits 31.1 and 31.2 are two certifications, one by each of our Chief Executive Officer and our Chief Financial Officer (the "Section 302 Certifications"). This Item 9A contains information concerning the evaluations of our disclosure controls and procedures and internal control over financial reporting that are referred to in the Section 302 Certifications. This information should be read in conjunction with the Section 302 Certifications for a more complete understanding of the topics presented.

Evaluation of Our Disclosure Controls and Procedures. The SEC requires that as of the end of the year covered by this Report, our CEO and CFO must evaluate the effectiveness of the design and operation of our disclosure controls and procedures and report on the effectiveness of the design and operation of our disclosure controls and procedures.

"Disclosure controls and procedures" mean the controls and other procedures that are designed with the objective of ensuring that information required to be disclosed in our reports filed under the Securities Exchange Act of 1934 (the "Exchange Act"), such as this Report, is recorded, processed, summarized and reported within the time periods specified in the rules and forms promulgated by the SEC. Disclosure controls and procedures are also designed with the objective of ensuring that such information is accumulated and communicated to our management, including the CEO and CFO, as appropriate, to allow timely decisions regarding required disclosure.

Limitations on the Effectiveness of Controls. Our management, including the CEO and CFO, does not expect that our disclosure controls and procedures or our internal control over financial reporting will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, as opposed to absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within an entity have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individua l acts of some persons, by collusion of two or more people, or by management override of the control. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, a system of controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected. Accordingly, our management has designed the disclosure controls and procedures to provide reasonable assurance that the objectives of the control system were met.

CEO/CFO Conclusions about the Effectiveness of the Disclosure Controls and Procedures. As required by Rule 13a-15(b), inTEST management, including our CEO and CFO, conducted an evaluation as of the end of the period covered by this Report, of the effectiveness of our disclosure controls and procedures. Based on that evaluation, our CEO and CFO concluded that, as of the end of the period covered by this Report, our disclosure controls and procedures were effective at the reasonable assurance level.

None.

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2007 Annual Meeting of Stockholders to be filed with the SEC on or before April 30, 2007, or, if our proxy statement is not filed on or before April 30, 2007, will be filed by that date by an amendment to this Form 10-K.

The information required by Item 201(d) of Regulation S-K is set forth below. The remainder of the information required by this Item 12 is incorporated by reference from our definitive proxy statement for our 2007 Annual Meeting of Stockholders to be filed with the SEC on or before April 30, 2006, or, if our proxy statement is not filed on or before April 30, 2007, will be filed by that date by an amendment to this Form 10-K.

The following table shows the number of securities that may be issued pursuant to our equity compensation plans (including individual compensation arrangements) as of December 31, 2006:

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2007 Annual Meeting of Stockholders to be filed with the SEC on or before April 30, 2007, or, if our proxy statement is not filed on or before April 30, 2007, will be filed by that date by an amendment to this Form 10-K.

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2007 Annual Meeting of Stockholders to be filed with the SEC on or before April 30, 2007, or, if our proxy statement is not filed on or before April 30, 2007, will be filed by that date by an amendment to this Form 10-K.

(b)     Exhibits required by Item 601 of Regulation S-K:

We are an independent designer, manufacturer and marketer of manipulator and docking hardware products, temperature management systems and tester interface products that are used by semiconductor manufacturers in conjunction with automatic test equipment ("ATE") in the testing of integrated circuits ("ICs" or "semiconductors").

The consolidated entity is comprised of inTEST Corporation (parent) and our wholly-owned subsidiaries. We manufacture our products in the U.S., Germany and Singapore. Marketing and support activities are conducted worldwide from our facilities in the U.S., the U.K., Germany, Japan and Singapore.

The semiconductor industry in which we operate is characterized by rapid technological change, competitive pricing pressures and cyclical market patterns. This industry is subject to significant economic downturns at various times. Our financial results are affected by a wide variety of factors, including, but not limited to, general economic conditions worldwide or in the markets in which we operate, economic conditions specific to the semiconductor industry, our ability to safeguard patents and intellectual property in a rapidly evolving market, downward pricing pressures from customers, and our reliance on a relatively few number of customers for a significant portion of our sales. In addition, we are exposed to the risk of obsolescence of our inventory depending on the mix of future business and technological changes within the industry. As a result of these or other factors, we may experience significant period-to-period fluctuations in future operating results.

Basis of Presentation and Use of Estimates

The accompanying consolidated financial statements include our accounts and those of our wholly-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated upon consolidation. The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Certain of our accounts, including long-lived assets, goodwill, inventory, deferred income tax valuation allowances and product warranty reserves, are particularly impacted by estimates.

Reclassification

Certain prior year amounts have been reclassified to be comparable with the current year's presentation.

Cash and Cash Equivalents

Short-term investments that have maturities of three months or less when purchased are considered to be cash equivalents and are carried at cost, which approximates market value.

Trade Accounts and Notes Receivable

Trade accounts receivable are recorded at the invoiced amount and do not bear interest. We grant credit to customers and generally require no collateral. To minimize our risk, we perform ongoing credit evaluations of our customers' financial condition. The allowance for doubtful accounts is our best estimate of the amount of probable credit losses in our existing accounts receivable. We determine the allowance based on historical write-off experience and the aging of such receivables, among other factors. Account balances are charged off against the allowance after all means of collection have been exhausted and the potential for recovery is considered remote. We do not have any off-balance sheet credit exposure related to our customers. Bad debt (recovery) expense was $(16), $55, and $38 for the years ended December 31, 2006, 2005 and 2004, respectively.

Notes receivable are due from trade customers in Japan and have original maturities of less than six months. The notes are non-interest bearing. Notes receivable were $163 and $164 at December 31, 2006 and 2005, respectively. Cash flows from accounts and notes receivable are recorded in operating cash flows.

Fair Value of Financial Instruments

Our financial instruments, principally accounts and notes receivable and accounts payable, are carried at cost which approximates fair value, due to the short maturities of the accounts. The estimated fair values of our capital lease obligations approximate their carrying value based upon the rates offered to us for similar type arrangements.

Inventories

Inventory is valued at standard cost, which approximates actual cost computed on a first-in, first-out basis, not in excess of market value. Cash flows from the sale of inventory are recorded in operating cash flows. On a quarterly basis, we review our inventories and record excess and obsolete inventory charges based upon our established objective excess and obsolete inventory criteria. These criteria identify material that has not been used in a work order during the prior twelve months and the quantity of material on hand that is greater than the average annual usage of that material over the prior three years. In certain cases, additional excess and obsolete inventory charges are recorded based upon current industry conditions, anticipated product life cycles, new product introductions and expected future use of the inventory. The charges for excess and obsolete inventory we record establish a new cost basis for the related inventory. We incurred excess and obsolete inventory charges of $431, $1,044 and $1,397 for the years ended December 31, 2006, 2005 and 2004, respectively.

Property and Equipment

Machinery and equipment are stated at cost. Depreciation is based upon the estimated useful life of the assets using the straight-line method. The estimated useful lives range from two to seven years. Leasehold improvements are recorded at cost and amortized over the shorter of the lease term or the estimated useful life of the asset. Total depreciation expense, including amortization of assets acquired under capital leases, was $1,431, $1,824 and $2,058 for the years ended December 31, 2006, 2005 and 2004, respectively. Expenditures for maintenance and repairs are charged to operations as incurred.

Impairment of Long-Lived Assets

In accordance with Statement of Financial Accounting Standards ("SFAS") No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets, we continually monitor events and changes in circumstances that could indicate carrying amounts of long-lived assets may not be recoverable. When such events or changes in circumstances occur, we assess the recoverability of long-lived assets by determining whether the carrying value of such assets will be recovered through undiscounted expected future cash flows. If the total of the undiscounted future cash flows is less than the carrying amount of those assets, we recognize an impairment loss based on the excess of the carrying amount over the fair value of the assets.

Goodwill and Intangibles

In accordance with SFAS No. 142, Goodwill and Other Intangible Assets, goodwill and other indefinite life intangible assets are no longer subject to amortization. Instead, they are subject to at least an annual assessment for impairment by applying a fair value based test. During 2006 and 2005, we assessed our goodwill for impairment in accordance with the requirements of SFAS No. 142, and no impairments of goodwill were indicated based on these assessments.

Goodwill at both December 31, 2006 and 2005 relates to the manipulator/docking hardware segment. Changes in the amount of the carrying value of goodwill for the years ended December 31, 2006 and 2005 are as follows:

During 2005, we issued 100,000 shares of common stock to the former owner of our Intestlogic subsidiary. These shares were issued pursuant to a provision contained in the amended agreement of sale that established revenue targets in 2005 that if met would require the issuance of up to 100,000 shares of common stock. During the third and fourth quarters of 2005, the revenue targets were achieved, and shares were issued. In connection with the issuance of these shares, we recorded goodwill of $374, which represented the fair market value of the shares issued.

As of December 31, 2006 and 2005, definite life intangibles totaled $299 and $315, net of accumulated amortization of $221 and $152, respectively. These definite life intangibles are the result of our acquisition of Intestlogic and are being amortized using the straight-line method over the remaining estimated useful life of six years. These definite life intangible assets are technology based, include patented technology and are allocated to the manipulator/docking hardware segment. The following table sets forth changes in the amount of the carrying value of definite life intangibles for the years ended December 31, 2006 and 2005, respectively:

Engineering and Product Development

Engineering and product development costs, which consist primarily of the salary and related benefits costs of our technical staff, as well as product development costs, are expensed as incurred.

Restructuring and Other Charges

We recognize a liability for restructuring costs at fair value only when the liability is incurred. The three main components of our restructuring plans are related to workforce reductions, the consolidation of excess facilities and asset impairments. Workforce-related charges are accrued when it is determined that a liability has been incurred, which is generally after individuals have been notified of their termination dates and expected severance benefits. Plans to consolidate excess facilities result in charges for lease termination fees and future commitments to pay lease charges, net of estimated future sub-lease income. We recognize charges for consolidation of excess facilities when we have vacated the premises. Assets that may be impaired consist of property, plant and equipment. Asset impairment charges are based on an estimate of the amounts and timing of future cash flows related to the expected future remaining use and ultimate sale or disposal of the asset. These estimates were derived using th e guidance of SFAS No. 146, Accounting for Exit or Disposal Activities, and SFAS No. 144, Accounting for the Impairment of Disposal of Long Lived Assets.

Foreign Currency

The accounts of our foreign subsidiaries are translated in accordance with SFAS No. 52, Foreign Currency Translation, which requires that assets and liabilities of international operations be translated using the exchange rate in effect at the balance sheet date. The results of operations are translated using an average exchange rate for the period. The effects of rate fluctuations in translating assets and liabilities of international operations into U.S. dollars are included in accumulated other comprehensive income (loss) in stockholders' equity. Transaction gains or losses are included in net earnings (loss). For the years ended December 31, 2006, 2005 and 2004, foreign currency transaction gains (losses) were $23, $(134) and $(223). The amount recorded in 2006 includes a $167 foreign currency translation adjustment related to the final dissolution of our subsidiary located in the U.K. as more fully discussed in Note 10.

Income Taxes

The asset and liability method is used in accounting for income taxes. Under this method, deferred tax assets and liabilities are recognized for operating loss and tax credit carryforwards and for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in the results of operations in the period that includes the enactment date. A valuation allowance is recorded to reduce the carrying amounts of deferred tax assets if it is more likely than not that such assets will not be realized.

Net Earnings (Loss) Per Common Share

Net earnings (loss) per common share is computed in accordance with SFAS No. 128, Earnings Per Share. Basic earnings (loss) per common share is computed by dividing net earnings (loss) by the weighted average number of common shares outstanding during each year. Diluted earnings (loss) per common share is computed by dividing net earnings (loss) by the weighted average number of common shares and common share equivalents outstanding during each year. Common share equivalents represent stock options and unvested shares of restricted stock and are calculated using the treasury stock method. Common share equivalents are excluded from the calculation if their effect is anti-dilutive.

A reconciliation of weighted average common shares outstanding -- basic to weighted average common shares outstanding -- diluted appears below:

New Accounting Standards

In June 2006, the FASB issued FASB Interpretation No. 48 ("FIN 48"), Accounting for Uncertainty in Income Taxes - an interpretation of FASB Statement No. 109. FIN 48 provides guidance for the recognition and measurement of uncertain tax positions in an enterprise's financial statements. Recognition involves a determination of whether it is more likely than not that a tax position will be sustained upon examination with the presumption that the tax position will be examined by the appropriate taxing authority that would have full knowledge of all relevant information. FIN 48 is effective for fiscal years beginning after December 15, 2006. We do not expect the adoption of FIN 48 to have a material impact on our consolidated financial position, results of operations or cash flows.

In June 2006, the FASB ratified the consensus reached by the Emerging Issues Task Force on Issue No. 06-3 ("EITF 06-3"), How Sales Taxes Collected From Customers and Remitted to Governmental Authorities Should Be Presented in the Income Statement. EITF 06-3 requires a company to disclose its accounting policy (i.e. gross vs. net basis) relating to the presentation of taxes within the scope of EITF 06-3. Furthermore, for taxes reported on a gross basis, an enterprise should disclose the amounts of those taxes in interim and annual financial statements for each period for which an income statement is presented. The guidance is effective for all periods beginning after December 15, 2006. We do not expect the adoption of EITF 06-3 to have a material impact on our consolidated financial position, results of operations or cash flows.

In September 2006, the FASB issued SFAS No. 157, Fair Value Measurements. SFAS 157 defines fair value, establishes a framework for measuring fair value and expands disclosure of fair value measurements. SFAS 157 applies under other accounting pronouncements that require or permit fair value measurements and accordingly, does not require any new fair value measurements. SFAS 157 is effective for financial statements issued for fiscal years beginning after November 15, 2007. We are currently in the process of assessing the impact the adoption of SFAS 157 will have on our financial statements.

Texas Instruments Incorporated accounted for 19%, 16% and 16% of our consolidated net revenues in 2006, 2005 and 2004, respectively. Teradyne, Inc. accounted for 11% of our net consolidated revenues in 2004. While all three of our operating segments sold to these customers, these revenues were primarily generated by our manipulator/docking hardware and tester interface segments. During the years ended December 31, 2006, 2005 and 2004, no other customer accounted for 10% or more of our consolidated net revenues.

Inventories held at December 31 were comprised of the following:

Other accrued expenses consist of the following:

Line of Credit

As of December 31, 2006, we had a secured credit facility which provided for maximum borrowings of $250. We have not utilized this facility to borrow any funds. Our only usage consists of the issuance of two letters of credit which are outstanding as of December 31, 2006 in the face amounts of $200 and $50, respectively. We pay a quarterly fee of 1.5% per annum on the total amount of the outstanding letters of credit. The terms of the credit facility require that we maintain a minimum level of $200 of cash with the bank. This credit facility expires on September 30, 2007.

Letters of Credit

As of December 31, 2006 and 2005, we had an outstanding letter of credit in the amount of $200. This letter of credit was originally issued in December 2000 as a security deposit under a lease that our Temptronic subsidiary entered into for its new facility in Sharon, Massachusetts. This letter of credit expires January 1, 2008; however, the terms of the lease require that the letter of credit be renewed at least thirty days prior to its expiration date for successive terms of not less than one year throughout the entire lease term, which ends February 28, 2011.

As of December 31, 2006 and 2005, we also had an outstanding letter of credit in the amount of $50. This letter of credit was issued in September 2004 as a portion of the security deposit under a lease that we entered into for a new facility for our tester interface operation based in northern California. We occupied this facility in late January 2005. This letter of credit expires September 13, 2007, however, the terms of the lease require that the letter of credit be renewed at least thirty days prior to its expiration date for successive terms of not less than one year until June 30, 2012, which is sixty days after the expiration of the lease term. If as of December 31, 2008, there have been no events of default or late payments of rent, the letter of credit shall be reduced to $0 upon our request.

Capital Lease Obligations

Periodically we enter into capital lease agreements to finance equipment purchases. The minimum lease payments under the capital leases in effect at December 31, 2006 are as follows:

In accordance with FASB Technical Bulletin No. 88-1, Issues Relating to Accounting for Leases, we record tenant improvements made to our leased facilities based on the amount of the total cost to construct the improvements regardless of whether a portion of that cost was paid through an allowance provided by the facility's landlord. The amount of the allowance, if any, is recorded as deferred rent. We amortize deferred rent on a straight-line basis over the lease term and record the amortization as a reduction of rent expense.

In addition, certain of our operating leases contain predetermined fixed escalations of minimum rentals during the original lease terms. For these leases, we recognize the related rental expense on a straight-line basis over the life of the lease and record the difference between the amounts charged to operations and amounts paid as accrued rent which is included in other accrued expenses on our balance sheet.

During 2005, we recorded $854 of additions to our leasehold improvements which were paid for on our behalf by the landlord of our new facility in San Jose, California. We occupied this facility during the first quarter of 2005. We also recorded this amount as deferred rent. Amortization of deferred rent for the years ended December 31, 2006 and 2005 was $118 and $107, respectively.

Operating Lease Commitments

We lease our offices, warehouse facilities, automobiles and certain equipment under noncancellable operating leases which expire at various dates through 2012. Total rental expense for the years ended December 31, 2006, 2005 and 2004 was $1,839, $1,855 and $2,131, respectively.

The aggregate minimum rental commitments under the noncancellable operating leases in effect at December 31, 2006 are as follows:

Product Warranties

Warranty expense for the years ended December 31, 2006, 2005 and 2004 was $378, $549 and $1,982, respectively. The following table sets forth the changes in the liability for product warranties for the years ended December 31, 2006 and 2005:

During the fourth quarter of 2004, we began the process of restructuring our operations with the goal of significantly reducing our fixed operating costs to position ourselves to more effectively meet the needs and expectations of the fluid ATE market. In mid-November 2004, we announced organization changes and cost structure adjustments (the "2004 Workforce Reduction"). In mid-March 2005, we announced our decision to close our U.K. manufacturing operation (the "U.K. Operation Closure"). In late July 2005, we made certain cost structure adjustments at our facility in San Jose, California (the "California Workforce Reduction").

2004 Workforce Reduction

In the quarter ended December 31, 2004, we accrued $527 for severance and related costs resulting from the termination of 43 domestic and 2 foreign employees. Of this amount, $266 was paid during the fourth quarter of 2004 and $261 remained accrued as of December 31, 2004. The severance and related costs were comprised of $383 in our Manipulator/Docking Hardware segment, $100 in our Temperature Management segment and $44 in our Tester Interface segment.

U.K. Operation Closure

In the quarter ended December 31, 2004, due to the history of operating losses experienced by our U.K. operation, combined with our forecasts that indicated potential future losses for this operation, we performed an assessment of the recoverability of the carrying value of this operation's long-lived assets. These long-lived assets consisted of property and equipment. As a result of this analysis we determined that an impairment existed and, accordingly, we recorded a $100 impairment of long-lived assets during the fourth quarter of 2004.

In March 2005, we announced our intention to close our U.K. operation, and we ceased manufacturing operations at this facility during the second quarter of 2005. During 2005, we accrued $234 for severance and related costs and $303 for lease termination costs. The $205 accrual remaining at December 31, 2005 related primarily to estimated lease termination costs. In November 2006, we entered into an agreement to sub-lease this facility. During the fourth quarter of 2006, we recorded an additional $23 of lease termination costs as a result of finalizing this sub-leasing arrangement as well as a $167 foreign currency translation adjustment related to final dissolution of this operation. As of December 31, 2006, there are no accruals

remaining related to the closure of our U.K. operation as all aspects of the closure are now complete. However, as a part of the sub-lease agreement we have made certain guarantees as more fully described in Note 9. Our U.K. operation was included in our Manipulator/Docking Hardware segment.

California Workforce Reduction

In the quarter ended September 30, 2005 we accrued $35 for severance and related costs resulting from the termination of six employees at our facility in San Jose, California. This entire amount was paid out during the third quarter of 2005. Our facility in San Jose is the headquarters for our tester interface product segment.

Our restructuring and other costs for 2006 and 2005 are summarized as follows:

We are subject to Federal and certain state income taxes. In addition, we are taxed in certain foreign countries. The cumulative amount of undistributed earnings of our foreign subsidiaries which we consider to be permanently reinvested and, as a result, for which U.S. income taxes have not been provided was $2,001, $950 and $2,896 at December 31, 2006, 2005 and 2004, respectively.

Income (loss) before income taxes was as follows:

During the fourth quarter of 2006, we repatriated $1.0 million in foreign earnings. There was no tax effect of this distribution as it was offset by our net operating loss carryforwards.

Deferred income taxes reflect the net tax effect of net operating loss and credit carryforwards as well as temporary differences between the carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. The following is a summary of the significant components of our deferred tax assets and liabilities as of December 31, 2006 and 2005: