inTEST CORPORATION
FORM 10-K
FOR THE YEAR ENDED DECEMBER 31, 2021

Cautionary Statement Regarding Forward-Looking Statements
 

From time to time, we make written or oral "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995, as amended, including statements contained in our filings with the Securities and Exchange Commission (the “SEC”) (including this Annual Report on Form 10-K for the year ended December 31, 2021 (this “Report”)), in our annual report to stockholders and in other communications. These statements do not convey historical information, but relate to predicted or potential future events, such as statements of our plans, strategies and intentions, or our future performance or goals, projections of revenue, taxable earnings (loss), net earnings (loss), net earnings (loss) per share, capital expenditures and other financial items, that are based on management’s current expectations and estimates. Our forward-looking statements can often be identified by the use of forward-looking terminology such as “believes,” “expects,” “intends,” “may,” “could,” “will,” “should,” “plans,” “projects,” “forecasts,” “seeks,” “anticipates,” “goal,” “objective,” “target,” “estimates,” “future,” “outlook,” “strategy,” “vision,” or variations of such words or similar terminology. Investors and prospective investors are cautioned that such forward-looking statements are only projections based on current expectations and estimates. These statements involve risks and uncertainties and are based upon various assumptions. Such risks and uncertainties include, but are not limited to:

We discuss many of these risks and uncertainties and others under Part I, Item 1A "Risk Factors," in this Report, and elsewhere in this Report. These risks and uncertainties, among others, could cause our actual future results to differ materially from those described in our forward-looking statements or from our prior results. Any forward-looking statement made by us in this Report is based only on information currently available to us and speaks to circumstances only as of the date on which it is made. We are not obligated to update these forward-looking statements, even though our situation may change in the future.

PART I

OVERVIEW AND STRATEGY

inTEST Corporation was incorporated in New Jersey in 1981 and reincorporated in Delaware in April 1997. The consolidated entity is comprised of inTEST Corporation and our wholly-owned subsidiaries. In this report, "we," "us," "our," and the "Company" refer to inTEST Corporation and our consolidated subsidiaries.

We are a global supplier of innovative test and process solutions for use in manufacturing and testing serving target markets which include automotive, defense/aerospace, industrial, life sciences, and security (collectively “Multimarket”) as well as both the front-end and back-end of the semiconductor manufacturing industry (“Semi Market”). For the period covered by this report, we managed our business as two operating segments, Thermal Products ("Thermal”) and Electromechanical Semiconductor Products ("EMS"). These businesses design and manufacture thermal test solutions, thermal process products and semiconductor test products.

In early 2021, we launched our 5-Point Strategy, our new corporate vision and our mission statement. Our vision is to be the supplier of choice for innovative test and process technology solutions. Our mission is to leverage our deep industry knowledge and expertise to develop and deliver high quality, innovative customer solutions and superior support for complex global challenges. We are committed to becoming recognized as a leader in our markets for design and manufacturing capabilities that help solve our customers’ most complex challenges in their manufacturing and quality processes. Our products provide highly engineered, high quality and cost-effective test and process solutions which are delivered with a customer focus that are intended to drive a high level of customer satisfaction. Our strategy is to consistently develop unique and differentiated solutions through innovative new product development and acquisitions.  We expect to expand our portfolio of products, services, and support to drive increased value to our customers to drive revenue and earnings growth. We believe by executing on our 5-Point Strategy, as described more fully below, that we can grow our annual revenue to between $200 million to $250 million by 2025, while maintaining our strong margin profile. We expect to do this through a combination of organic growth and acquisitions. Our 5-Point Strategy is as follows:

Global and Market Expansion. We believe we can provide significant and sustainable long-term growth by expanding our serviceable addressable market (“SAM”) and building a larger installed product base. To capture this opportunity, we intend to make investments to drive further penetration in our existing markets. These investments may include initiatives to increase revenue both by leveraging our customer relationships to provide a broader array of our current portfolio of products to our existing customer base as well as by expanding our customer base within these markets. In addition, we intend to increase our global footprint and coverage to better serve new and existing customers. Finally, our strategy in this area includes targeting expansion into new markets with our existing product portfolio. In 2021, we have increased our SAM for our legacy product portfolio by over $70 million. We have gained new customers in both the Semi Market and in our other target markets and we have expanded our sales and support network to regions of the world where we identified gaps in coverage, including Mexico, Korea and Italy. Through our acquisitions, we expanded our European footprint with additional locations in the Netherlands and Germany.   Innovation and Differentiation. We plan to continue leveraging our engineering know-how and expertise to deliver innovative solutions which we believe often outperform those of our competitors. In 2021, we increased our investment in engineering resources with the goal of developing new and unique solutions to help solve our customers’ most complex challenges in their manufacturing and quality processes. Designed to be broadly applicable through more standardized platforms, these solution platforms enable late-stage configuration to address each customers’ unique requirements. We believe creating more standardization to increase market availability will drive growth and reduce costs by enabling us to increase the breadth and depth of our customer base. In 2021, we completed initiatives that reduced the size and weight for our induction heating products, standardized our chiller offerings for the cannabis industry and progressed our automated manipulator and intelligent docking system offerings.

Service and Support. We have strong customer relationships and believe service and support activities are valuable in strengthening customer satisfaction, loyalty and retention. Through ensuring that we serve our customers’ needs, whether by expanding service coverage and decreasing response time or through expanding and enhancing service offerings, we believe we can drive revenue growth and strengthen our customer relationships. We expect to invest in resources to fill areas where we have identified gaps in service and support. We also plan to invest in technology to provide remote service capabilities to monitor the health of our products that are onsite at customer locations. As we expand our SAM and increase our market penetration, we also expect to identify opportunities to add more consumable products within our offerings. We believe that increasing the number of ways and the frequency with which we make customer contacts can drive growth in our business in the future. In 2021, we added field service technicians in the U.S., a service partner in China and expanded our coil fabrication capabilities in order to reduce our response time to customers when issues arise with their coils. We have new rental program and service agreement offerings as well as remote monitoring services. With our acquisitions, we added test programming and design services, equipment upgrade programs and a recurring service revenue stream for probes.

Strategic Acquisitions & Partnerships. In addition to driving organic growth, our strategy includes acquiring businesses, technologies or products that are complementary to our current product offerings. Our acquisition strategy is to add to our current solutions by expanding capabilities, such as radio frequency or temperature range, and to expand geographic presence. We also will consider new technologies that replicate the highly engineered, high quality and differentiated solutions of our current product portfolio for test and process solutions. Our focus is on expanding our electronic test capabilities, widening our thermal test capabilities in areas such as environmental test, and building out around processing technologies. In 2021, we made three acquisitions that added to our process and test solutions offerings.

Talent and Culture. We believe ensuring the right people are in the right roles and are empowered to deliver success is crucial to the achievement of our core strategies. In addition, we have and will continue to create a culture and environment of openness, one that is results-oriented and drives accountability across the organization. Finally, we intend to foster diversity, equity and inclusion and provide opportunities for career development so as to maximize employee engagement, all of which is necessary to achieving our corporate vision. In 2021, we implemented a new performance management system and talent reviews, completed an employee engagement survey and put an Employee Stock Purchase Plan in place. Approximately two-thirds of our new hires in 2021 were women or underrepresented minorities.

ACQUISITIONS

A key element to our strategy for growth is through acquisitions. During 2021, we completed three acquisitions that expanded our technology offerings, diversified our markets and customers and expanded our presence into Europe. 

On October 6, 2021, we acquired substantially all of the assets of Z-Sciences Corp. (“Z-Sciences”) (now North Sciences), a developer of ultra-cold storage solutions for the life sciences cold chain market. This small, tuck-in transaction enhances our technology, adds new talent, and provides a low-cost entry into this fast growing, fragmented market. This business is being integrated into our Thermal segment.

On October 28, 2021, we acquired substantially all of the assets of Videology Imaging Solutions Inc. and Videology Imaging Solutions (collectively, “Videology”), a global designer, developer and manufacturer of original equipment manufacturer (“OEM”) digital streaming and image capturing solutions, for approximately $12.1 million. The acquisition expanded our process technology offerings, diversified our reach into key target markets and broadened our customer base. This business also is being integrated into our Thermal segment.

On December 21, 2021, we acquired Acculogic Inc. and its affiliates (“Acculogic”), a global manufacturer of robotics-based electronic production test equipment and application support services, for approximately $9.3 million. The acquisition expanded our global reach and enhanced our product portfolio with leading technologies and automation services. This business is being integrated into our EMS segment.

MARKETS

Overview

We are focused on specific target markets which include automotive, defense/aerospace, industrial, life sciences, and security as well as both the front-end and back-end of the semiconductor manufacturing industry. Our largest market is the semiconductor industry which represents the roots of inTEST’s engineered product history. We refer to our markets as “Semi Market” and “Multimarket” and expect in the future to further break out our sales and orders by the key target markets on which we are focused.

During 2021, our revenue from the Semi Market grew $28.1 million or 105% as we refocused our efforts to serve our customers well, gain market share and expand our product offerings. Revenue to Multimarket grew $3.0 million, or 11%, in 2021 as we executed on our 5-Point Strategy to increase market penetration, expanded our aggregate SAM and acquired new technology solutions.

Multimarket

We provide several solutions to our automotive, defense/aerospace, industrial, life sciences, and security markets. We believe a number of drivers are creating more opportunity for our highly-engineered solutions in these markets.

In the automotive market, we provide solutions that help in the quality and productivity of electric vehicle (“EV”) manufacturers. Our solutions include induction heating solutions for battery inserts and automated test equipment for the battery cells. We believe there is a strong global growth trend in EVs and that our differentiated solutions can be applied with more customers in more geographic regions. 

In the defense/aerospace industry, we provide ATE to prime and subcontract manufacturers to ensure quality control is maintained while also providing quicker, more accurate test times of electronic circuit boards.

In the life sciences industry, we provide image capture products, heating systems for medical device manufacturing and are a supplier of equipment for critical applications within the medical cold chain for pharmaceuticals.

In the security industry, our image capture and data management technologies are used in a broad variety of applications. 

The industrial market is the broadest, most diverse area we serve with a majority of our products serving a variety of applications.  Applications for our induction heating products include annealing, bonding, brazing, curing, forging, heat treating, melting and shrink-fitting. Applications for our thermal test and process products include pressure-sensor testing and cold-trap cooling for industrial processes. We believe the trend toward the use of green energy, automation, increased productivity and expanding manufacturing technology present opportunities for us to help our customers solve their complex challenges.

Semi Market

The Semi Market includes both the broader semiconductor manufacturing industry as well as the more specialized semiconductor automated test equipment (“ATE”) and wafer processing sectors within the broader semiconductor market.

We believe the Semi Market, a highly cyclical industry historically, is currently undergoing strong growth as a result of billions of dollars of investments in new fabrication (“fab”) facilities around the world. These investments are being driven by the continued growth of the use of electronics, the need for powering an ever-growing number of devices and the continued economic development of less wealthy nations. We believe the COVID-19 pandemic and geopolitical tensions have made the high concentration of semiconductor manufacturing in China and Taiwan very apparent to more wealthy nations and has spurred the investment in expansion of this industry in areas outside of these regions.

We serve both the front-end of the semiconductor manufacturing process at the very early stage of the development of the silicon carbide used to create wafers on which integrated circuits (“ICs”) are printed and the back-end of the semiconductor manufacturing process which includes the testing of the ICs.

We believe that semiconductor manufacturers remain under pressure to maximize production yields and reduce testing costs. At the same time, the growing complexity of ICs has increased the difficulty of maximizing test yields. In order to address these market trends, we believe semiconductor manufacturers strive for more effective utilization of ATE, smaller test areas and increased wafer level testing which requires our differentiated solutions that include test head manipulators, test head docking stations and test interfaces. As technology advances and ICs become increasingly more complex, we believe the need for increased capabilities in the test process should drive greater demand for our equipment. We expect that more front-end testing is going to be required in order to ensure maximum yield from the massive capital investments being made in fab expansion.

OUR SOLUTIONS

We focus our development efforts on designing and producing high quality products that provide superior performance and cost-effectiveness. We seek to address each manufacturer's individual needs through innovative and customized designs, use of the best materials available, quality manufacturing practices and personalized service. We design solutions to overcome the evolving challenges facing the Semi Market and other markets that we serve, which we believe provide the following advantages:

Temperature-Controlled Testing. Our Thermostream(R) products are used by manufacturers in a number of markets to stress test a variety of semiconductor and electronic components, printed circuit boards and sub-assemblies. Factors motivating manufacturers to use temperature testing include design characterization, failure analysis and quality control, as well as determining performance under extreme operating temperatures, all of which contribute to manufacturing cost savings. Our thermal platforms and temperature chambers, sold under our Sigma Systems product line, can accommodate large thermal masses and are found in both laboratory and production environments. Thermonics' products provide a range of precision temperature forcing systems and have been melded into Temptronic's ATS ThermoStream product line. The Thermonics brand is now used to market a family of process chillers for test and industrial applications.
 

Ultra-Cold Storage Solutions. With our acquisition of Z-Sciences (now North Sciences) we have expanded our product offerings to include high-performance biomedical freezer, refrigerators and mobile storage solutions that meet versatile applications, including ultra-cold storage solutions for biological sample banks, blood safety, vaccine safety, medical supplies and reagent safety.

Induction Heating. Our induction heating products are used in process applications where precision-controlled heating is needed.  Customers use our induction heating products in conjunction with other technologies in various manufacturing environments to improve production efficiencies and reduce or eliminate greenhouse gas emissions.  Applications for our EKOHEAT(R) or EASYHEAT™ induction heating products include annealing, bonding, brazing, curing, forging, heat treating, melting, shrink-fitting and testing.

Digital Streaming and Image Capturing Solutions. Our acquisition of Videology added industrial-grade circuit board mounted digital imaging solutions, Zoom Block cameras and complete image capture systems. Videology also offers OEMs complete software solutions that are integrated into a larger system, camera systems designed to the customers’ specifications and that can interface with the customers’ software.

Scalable, Universal, High Performance Interface Technology. Our universal test head manipulators provide a high degree of positioning flexibility with a minimum amount of effort. As a result, our products can be used in virtually any test setting. Our manipulator products are designed to accommodate the increased size of test heads. Our docking hardware products offer precise control over the connection to test sockets, probing assemblies and interface boards, reducing downtime and minimizing costly damage to fragile components. Our newest manipulator and docking hardware designs offer automated capabilities that allow for reduced downtime and increased productivity through predictable and repeatable production setup with reduced risk of operator error. Our tester interface products optimize the integrity of the signals transmitted between the test head and the device under test by being virtually transparent to the test signals, which results in increased accuracy of the test data and may thus enable improved test yields.

Robotics-Based Electronic Production Test Equipment. Our acquisition of Acculogic adds to our electronic test platform offerings beyond those which exclusively serve the Semi Market. Acculogic designs and manufactures robotics-based electronic production test equipment and provides application support services which are sold to electronic manufacturers including OEM and contract electronic manufacturers as well as battery manufacturers.

Compatibility and Integration. A hallmark of our products has been, and continues to be, compatibility with a wide variety of ATE. Our manipulator and docking hardware products are all designed to be used with otherwise incompatible ATE. We believe this integrated approach to ATE facilitates smooth changeover from one tester to another, longer lives for interface components, better test results, increased ATE utilization and lower overall test costs.

Worldwide Customer Service and Support. We have long recognized the need to maintain a physical presence near our customers' facilities. As of December 31, 2021, we had manufacturing facilities in the U.S. in Massachusetts, New Jersey, New York and Rhode Island as well as outside the U.S. in Canada, Germany and the Netherlands. We provided service to our customers from sales and service personnel based in the U.S., Europe and Asia. Our engineers are easily accessible to, and can work directly with, most of our customers from the time we begin developing our initial proposal, through the delivery, installation and use of the product by our customer. In this way, we are able to develop and maintain close relationships with our customers.

OUR SEGMENTS

During the period covered by this report, we reported under two operating segments, Thermal and EMS.  Our Thermal segment consists of (i) inTEST Thermal Solutions (“iTS”), which manufactures and sells products under the Temptronic, Sigma and Thermonics brand names and has operations in Massachusetts, Germany and Singapore, (ii) Ambrell which has operations in New York, the Netherlands and the U.K, (iii) Videology, which has operations in Rhode Island and the Netherlands and (iv) North Sciences (formerly Z-Sciences), which operates out of our iTS manufacturing facility in Massachusetts. Customers use the thermal solutions produced by iTS for product development, characterization and production test or process applications. Ambrell provides customers with induction heating solutions for a wide variety of manufacturing processes.  Videology is a designer, developer and manufacturer of digital streaming and image capturing solutions. North Sciences is a developer of ultra-cold storage solutions for the life sciences cold chain market. Our Thermal segment provides these solutions across an array of markets including automotive, defense/aerospace, industrial, life sciences, security and semiconductor.

Our EMS segment consists of our manufacturing operations in New Jersey, and Acculogic, which has operations in Canada, the U.S. (in Minnesota and California) and Germany. Semiconductor manufacturers use our EMS solutions in back-end testing where our mechanical and electrical products serve production testing of wafers and specialized packaged ICs.  These ICs include microprocessors, digital signal processing chips, mixed signal devices, MEMS (Micro-Electro-Mechanical Systems), application specific ICs and specialized memory ICs, and are used primarily in the automotive, consumer electronics, industrial, and mobile communication markets. Our products are a combination of standard designs based on industry requirements and those designed specifically to meet a customer's particular combination of ATE. With the acquisition of Acculogic, our EMS segment now also includes robotics-based electronic test equipment and application support services used primarily in defense/aerospace, automotive, battery, life sciences and electronic manufacturing services industries.

Thermal Products

ThermoStream(R) Products: Our ThermoStream(R) products are used in the Semi Market as a stand-alone temperature management tool, or in a variety of electronic test applications as part of our MobileTemp systems. ThermoStream(R) products provide a source of heated and cooled air that can be directed over the component or device under test. These systems are capable of controlling temperatures to within +/- 0.1 degree Celsius over a range of -100 degrees Celsius to as high as +300 degrees Celsius within 1.0 degree Celsius of accuracy. As a stand-alone tool, ThermoStreams(R) provide a temperature-controlled air stream to rapidly change and stabilize the temperature of packaged ICs and other devices.

Our MobileTemp Series combines our ThermoStream(R) products with our family of exclusive, high-speed ThermoChambers to offer thermal test systems with fast, uniform temperature control in a compact package enabling temperature testing at the test location. MobileTemp Systems are designed specifically for small thermal-mass applications beyond the Semi Market and have found application in the automotive, electronic, fiber optic and oil field service markets testing such things as electronic sub-assemblies, sensor assemblies, and printed circuit boards.

Traditionally, our customers use ThermoStream(R) products primarily in engineering, quality assurance and small-run manufacturing environments. ThermoStream(R) and MobileTemp products generally range in price from approximately $15,000 to $50,000.

Thermal Chambers: Our thermal chamber products are available in a variety of sizes, from small bench-top units to chambers with internal volumes of twenty-seven cubic feet and greater and with temperature ranges as wide as from -190 degrees Celsius to +500 degrees Celsius. Chambers can be designed to utilize liquid nitrogen or liquid carbon dioxide cooling or mechanical refrigeration, and sometimes both. These chambers can accommodate large thermal masses and are found in both laboratory and production environments. Chambers are generally priced from $15,000 to $150,000.

Thermal Platforms: Our thermal platforms are available in surface sizes ranging from 7.2 square inches to 616 square inches. They provide a flat, thermally conductive, precisely temperature controllable surface that is ideal for conditioning of testing devices with a flat surface. Platforms are available with temperature ranges as broad as -100 degrees Celsius to +250 degrees Celsius. Thermal platforms can be designed to utilize either liquid nitrogen or liquid carbon dioxide cooling or mechanical refrigeration. Platforms offer virtually unimpeded access to the device under test and their easy access and compact size makes them ideal for convenient bench-top use. Platforms are generally priced from $6,500 to $65,000.

Thermonics(R) Products: Our Thermonics temperature conditioning products, which include our process chillers, provide tempered gas or fluid to enable customers to maintain desired thermal conditions within their tool or process. Applications include general industrial, chemical processing, energy, electronics, automotive, defense/aerospace and semiconductor markets. Prices generally range from $20,000 to greater than $300,000.

Ultra-Cold Storage Solutions: Our high-performance biomedical freezers, refrigerators and mobile storage solutions meet versatile applications, including ultra-cold storage solutions for biological sample banks, blood safety, vaccine safety, medical supplies and reagent safety. Prices generally range from $1,500 to $20,000.

EKOHEAT(R) Products: Our EKOHEAT(R) induction heating systems with power ratings from 10kW to 1 MW are manufactured by Ambrell and are used to conduct fast, efficient, repeatable non-contact heating of metals or other electrically conductive materials in order to transform raw materials into finished parts. Prices generally range from $25,000 to $250,000.

EASYHEAT™ Products: Our compact EASYHEAT™ induction heating systems with power ratings from 0.5kW to 10kW are manufactured by Ambrell and used to conduct fast, efficient, repeatable non-contact heating of metals or other electrically conductive materials in order to transform raw materials into finished parts. Prices generally range from $5,000 to $25,000.

Applications for both EKOHEAT(R) and EASYHEAT™ products include annealing, bonding, brazing, curing, forging, heat treating, melting, shrink-fitting, soldering and testing.

Digital Streaming and Image Capturing Solutions. Our industrial-grade imaging solutions are designed and manufactured by Videology. They provide custom solutions for OEMs and end users and specialize in meeting customer’s design specifications for imaging systems. Per unit prices for these products can range from less than $100 to as much as $5,000 for a single unit. These products are generally purchased in higher volumes than our other products.

EMS Products

Semiconductor manufacturers typically produce ICs in multiples of several hundred or more on a silicon wafer that is later separated or "diced" into individual ICs. Extended leads are then attached to the individual ICs for later connection to other electrical components. In most cases, the ICs are then encapsulated in a plastic, ceramic or other protective housing. These process steps are called "packaging."

Wafers are tested before being diced and packaged to ensure that only properly functioning ICs are packaged. This testing step has several names, including "front-end test," "wafer test," "wafer probe" or "wafer sort." In front-end test, an electronic handling device known as a wafer prober automatically positions the wafer under a probe card that is electronically connected to a "test head," which connects electrically to a test system. During front-end testing, there is a growing trend of thermally conditioning the wafer during test. Once the good ICs have been identified, they are packaged.

The packaged ICs also require testing, called "back-end test" or "final test," to determine if they meet design and performance specifications. Packaged ICs are tested after loading into another type of electronic handling device called a "package handler" or "handler," which then transfers the packaged ICs into a test socket that is attached to the test head. These handlers may be temperature controlled for testing.

Testers range in price from approximately $100,000 to over $2.0 million each, depending primarily on the complexity of the IC to be tested. Probers and handlers range in price from approximately $50,000 to $500,000 each. A typical test floor of a large semiconductor manufacturer may have 100 test heads and 100 probers or 250 handlers supplied by various vendors for use at any one time. While larger global semiconductor manufacturers typically purchase ATE to test the ICs they manufacture, there are a growing number of semiconductor manufacturers who outsource IC testing to third-party foundries, test and assembly providers. 

Test head manipulators, also referred to as positioners, facilitate the movement of the test head to the electronic device handler. Docking hardware mechanically connects the test head to the wafer prober or handler. Tester interface products provide the electrical connection between the test head and the wafer or packaged IC. 

Manipulator Products. We offer three lines of manipulator products: the in2(R), the Cobal and the LS Series. These free-standing universal manipulators can hold a variety of test heads and enable an operator to reposition a test head for alternate use with any one of several probers or handlers on a test floor.

Our manipulator products incorporate a balanced floating-head design. This design permits a test head weighing up to 1,760 pounds to be held in an effectively weightless state, so it can be moved manually or with optional powered assistance, up or down, right or left, forward or backward and rotated around each axis (known as six degrees of motion freedom) by an operator using a modest amount of force or with a computer controlled pendant. The same design features enable the operator to dock the test head without causing inadvertent damage to the fragile electrical contacts. As a result, after testing a particular production lot of ICs, the operator can quickly and easily disconnect a test head that is held in an in2(R) or Cobal Series manipulator and equipped with our docking hardware and dock it to another electronic device handler for testing either a subsequent lot of the same packaged ICs or to test different ICs. With the LS Series manipulators, the undocking, movement of the test head and redocking can be done automatically through the computer controlled pendant. Our manipulator products generally range in price from approximately $12,000 to $85,000.

Docking Hardware Products. We offer two lines of docking hardware products: fixed manual docking and IntelliDock pin and cup docking. Both types protect the delicate interface contacts and ensure proper repeatable and precise alignment between the test head's interface board and the prober's probing assembly or the handler's test socket as they are brought together, or "docked." Fixed manual docking includes a mechanical cam mechanism to dock and lock the test head to the prober or handler. IntelliDock is an automated docking solution that provides operator feedback for each docking step via a touchscreen display, and when coupled with the LS Series manipulator, redeployment of the test head can be done automatically and accurately via the computer pendant. Both types of docking hardware products eliminate motion of the test head relative to the prober or handler once docked. This minimizes deterioration of the interface boards, test sockets and probing assemblies that is caused by constant vibration during testing. Our docking hardware products are used primarily with floating-head universal manipulators when maximum mobility and inter-changeability of handlers and probers between test heads is required. By using our docking hardware products, semiconductor manufacturers can achieve cost savings through improved ATE utilization, improved accuracy and integrity of test results, optimized floor support and reduced repairs and replacements of expensive ATE interface products.

We believe our docking hardware products offer our customers the ability to make various competing brands of test heads compatible with various brands of probers and handlers by only changing interface boards. This is called "plug-compatibility." Plug-compatibility enables increased flexibility and utilization of test heads, probers and handlers purchased from various ATE manufacturers. We believe that because we do not compete with ATE manufacturers in the sale of probers, handlers or testers, ATE manufacturers are willing to provide us with the information that is integral to the design of plug-compatible products. Our docking hardware products generally range in price from approximately $2,000 to $25,000.

Interface Products. Our tester interface products provide the electrical connections between the tester and the wafer prober or IC handler to carry the electrical signals between the tester and the probe card on the prober or the test socket on the handler. Our designs optimize the integrity of the transmitted signal. Therefore, our tester interfaces can be used with high speed, high frequency, digital or mixed signal testers used in testing more complex ICs. Because our tester interface products enable the tester to provide more reliable yield data, our interfaces may also reduce IC production costs. We design standard and modular interface products to address most possible tester/prober combinations on the market today. In addition, we provide a custom design service that will allow any of our customers to use virtually any tester, prober or handler combination with any type of device, such as analog, digital, mixed signal and radio frequency. For example, our Centaur(R) modular interface is designed to provide flexibility and scalability through the use of replaceable signal modules which can be easily changed on the test floor as our customers' testing requirements change. In addition to the Centaur(R) modular interface, we also offer over 200 different types of tester interface models that we custom designed for our customers' specific applications. These tester interface products generally range in price from approximately $7,000 to $175,000.

Scorpion Flying Probe Test Systems. Acculogic designs and manufactures robotics-based electronic test equipment and provides application support services for OEMs, contract electronic manufacturers and battery manufacturers. These systems are used to structurally test an electronic device. Structural testing is a confirmation that the device was manufactured properly. Acculogic’s Scorpion Flying Probe system can be quickly programmed to test almost any printed circuit board. This programming is quickly done with a digitized drawing of the device to be tested. Traditional in circuit testing systems require a dedicated fixture for each board to be tested. Acculogic’s Flying Probe system can test a virtually unlimited number of boards without any hardware modifications. These systems generally sell for between $200,000 and $600,000.

BRiZ Automated Test and Programming Services: BRiZ is an automated test platform that can consolidate any variety of circuit board test and programming into a single, compact, low-cost test station. These platforms generally sell for between $50,000 and $250,000.

Financial Information About Operating Segments and Geographic Areas

Please see Note 19 to the consolidated financial statements included in Item 8 of this Report for additional data regarding revenue, profit or loss and total assets of each of our segments and revenue attributable to foreign countries.

MARKETING, SALES AND CUSTOMER SUPPORT

We market and sell our products globally and across multiple markets, as previously discussed. North American and European semiconductor manufacturers, as well as third-party foundries, test and assembly providers, have located most of their back-end factories in Southeast Asia. The front-end wafer fabrication plants of U.S. semiconductor manufacturers are primarily in the U.S. Likewise, European, Taiwanese, South Korean and Japanese semiconductor manufacturers generally have located their wafer fabrication plants in their respective countries.

Thermal Products: We market our thermal products brands, Temptronic, Sigma Thermonics, and North Sciences (formerly Z-Sciences) under the umbrella name of inTEST Thermal Solutions and sales to ATE manufacturers are handled directly by our own sales force. Sales to life sciences customers worldwide are handled directly by our own sales force or by our network of independent representatives and distributors. Sales to semiconductor manufacturers and customers in other markets in the U.S. are handled through independent sales representative organizations. In Singapore and Malaysia, our sales and service are handled through our internal sales and service staff. In the rest of Asia, our sales are handled through distributors. In Europe, sales managers at our office in Germany, as well as regional distributors and independent sales representatives, sell to semiconductor manufacturers and customers in other markets. We communicate with our distributors regularly and have trained them to sell and service our thermal products.

We market our EASYHEAT™ and EKOHEAT(R) precision induction heating equipment to manufacturers who require specialized industrial heating in a wide array of industries, including automotive, aerospace and semiconductor, and are sold globally through a combination of regional sales managers and independent distributors. In North America, direct regional sales managers provide sales coverage augmented by independent sales representatives. In Europe, direct sales managers provide sales coverage augmented by independent distributors. In Asia, distributors have responsibility for sales and service of our products. We generate a significant portion of our sales leads through our website as well as through trade show attendance where we display our products and technology.

We also provide induction heating product support through our SmartCARE Service offering, which includes equipment repairs and training, preventative maintenance, enhanced warranties and spare parts. Our field service engineers, located in the U.S. and Europe, provide service and support globally. Additionally, a number of distributors in Europe and Asia have factory-trained service technicians.

We market our Videology industrial camera solutions to OEMs and end users both directly and through distributors.  We have both manufacturing and service capabilities in the U.S. and the Netherlands.  We acquire our sales from repeat long-term customers, new leads through our website, regional sales managers and distributors as well as through trade show attendance where we display our products and technology.

EMS Products: In North America, we sell to semiconductor manufacturers through internal account representatives and independent, commissioned sales representatives. North American sales representatives also coordinate product installation and support with our technical staff and participate in trade shows.

Our internal sales account managers handle sales to ATE manufacturers and are responsible for a portfolio of customer accounts and for managing certain independent sales representatives. In addition, our sales account managers are responsible for pricing, quotations, proposals and transaction negotiations, and they assist with applications engineering and custom product design. Technical support is provided to North American customers and independent sales representatives by employees based in New Jersey, California and Texas.

In Europe, we sell to semiconductor and ATE manufacturers through our internal sales staff. Technical support is provided by our staff in the U.K. In China, Japan, the Philippines, South Korea, and Thailand, we sell through the use of independent sales representatives who are supervised by our internal sales staff. In Malaysia, Singapore and Taiwan, our sales are handled by our internal sales staff. International sales representatives are responsible for sales, installation, support and trade show participation in their geographic market areas. Technical support is provided to Asian customers primarily by employees based in Malaysia, the Philippines and Taiwan.

Acculogic markets and sells its products in North America through a combination of internal sales staff and manufacturer representatives. Customer support is supplied by a team located throughout North America. In Europe, Acculogic sells its products through manufacturer representatives and supports them with direct employees based in its Hamburg, Germany facility. In Asia, Acculogic markets and sells its products through a mixture of distributors and manufacturer representatives. Customer support is provided by trained distributors and supplemented by direct employees from North America and Europe.

CUSTOMERS

We market all of our products to end users including semiconductor manufacturers, third-party foundries and test and assembly providers, as well as to OEMs, which include ATE manufacturers and their third-party outsource manufacturing partners. We also market our products to independent testers of semiconductors, manufacturers of automotive, defense/aerospace, industrial, life sciences and security products, semiconductor research facilities, and manufacturers and manufacturing process integrators for a variety of industrial process applications. Our customers use our products principally in production testing or process/manufacturing applications, although our ThermoStream(R) products traditionally have been used largely in engineering development and quality assurance. We believe that we sell to most of the major semiconductor manufacturers in the world.

During the year ended December 31, 2021, Texas Instruments Incorporated accounted for 13% of our consolidated revenue. While both of our operating segments sold products to this customer, this revenue was primarily generated by our EMS segment. During the year ended December 31, 2021, no other customer accounted for 10% or more of our consolidated revenue. During the year ended December 31, 2020, no customer accounted for 10% or more of our consolidated revenue. Our ten largest customers accounted for approximately 43% and 35% of our consolidated revenue in 2021 and 2020, respectively. The loss of any one or more of our largest customers, or a reduction in orders by a major customer, could materially reduce our revenue or otherwise materially affect our business, financial condition or results of operations.

Our largest customers in 2021 included:

MANUFACTURING AND SUPPLY

As of December 31, 2021, our principal manufacturing operations consisted of assembly and testing at our facilities in Massachusetts, New Jersey and New York. As a result of the acquisitions of Videology and Acculogic, we now have manufacturing facilities in Rhode Island, Canada, Germany and the Netherlands. We assemble most of our products from a combination of standard components and custom parts that have been fabricated to our specifications by either third-party manufacturers or our own facilities. Our practice is to use high quality raw materials and components in our products. The primary raw materials used in fabricated parts are widely available. Substantially all of our components are purchased from multiple suppliers; however, certain raw materials and components are sourced from single suppliers. Although, from time to time, certain components may be in short supply due to high demand or inability of vendors to meet quality or delivery requirements, we believe that all materials and components are available in adequate amounts from other sources.

We conduct inspections of incoming raw materials, fabricated parts and components using sophisticated measurement equipment. This includes testing with coordinate measuring machines in all but one of our manufacturing facilities to ensure that products with critical dimensions meet our specifications. We have designed our inspection standards to comply with applicable MIL specifications and ANSI standards.

Our Massachusetts facility is ISO 9001:2015 certified. Our New York facility is ISO 9001:2015 certified. Our Canada facility is ISO9001:2015 certified. Our New Jersey facility manufactures products only for the semiconductor industry where ISO certification is not required. However, this location does employ the practices embodied in the ISO 9001:2008.

ENGINEERING AND PRODUCT DEVELOPMENT

Our success depends on our ability to provide our customers with products and solutions that are well engineered and to design those products and solutions before, or at least no later than, our competitors. As of December 31, 2021, we employed a total of 68 engineers engaged in engineering and product development. In addition, when the demands of engineering and product development projects exceed the capacity or knowledge of our in-house staff, we retain temporary third-party engineering and product development consultants to assist us. Our practice in many cases is to assign engineers to work with specific customers, thereby enabling us to develop the relationships and exchange of information that is most conducive to successful product development and enhancement. In addition, some of our engineers are assigned to new product research and development and have worked on such projects as the development of new types of universal manipulators, the redesign and development of new thermal products and the development of high-performance interfaces.

Since most of our products are customized, we consider substantially all of our engineering activities to be engineering and product development. In the years ended December 31, 2021 and 2020, we spent approximately $5.5 million and $5.1 million, respectively, on engineering and product development.

PATENTS AND OTHER PROPRIETARY RIGHTS
 

We intend to protect our technology by filing patent applications for the technologies that we consider important to our business. We also rely on trademarks, trade secrets, copyrights and unpatented know-how to protect our proprietary rights.

We believe our intellectual property has value, and we have taken in the past, and will take in the future, actions we deem appropriate to protect such property from misappropriation. There can be no assurance, however, that such actions will provide meaningful protection from competition. In the absence of intellectual property protection, we may be vulnerable to competitors who attempt to copy or imitate our products or processes. For additional information regarding risks related to our intellectual property, see Part I, Item 1A "Risk Factors" in this Report.

While we believe that our patents and other proprietary rights are important to our business, we also believe that, due to the rapid pace of technological change in the markets we serve, the successful manufacture and sale of our products also depends upon our engineering, manufacturing, marketing and servicing skills.

It is our practice to require that all of our employees and third-party product development consultants assign to us all rights to inventions or other discoveries relating to our business that were made while working for us. In addition, all employees and third-party product development consultants agree not to disclose any private or confidential information relating to our technology, trade secrets or intellectual property.

As of December 31, 2021, we held 54 active U.S. patents and had three pending U.S. patent applications covering various aspects of our technology. Our U.S. patents expire at various times beginning in 2022 and extending through 2038. During 2021, no U.S. patents were issued and ten U.S. patents expired. We do not believe that the upcoming expiration of certain of our patents in 2022 will have a material impact on our business. We also hold foreign patents and file foreign patent applications, in selected cases corresponding to our U.S. patents and patent applications, to the extent management deems appropriate.

COMPETITION

We operate in an increasingly competitive environment within both of our operating segments. Some of our competitors have greater financial resources and more extensive design and production capabilities than us. Certain markets in which we operate have become more fragmented, with smaller companies entering the market. These new smaller entrants typically have much lower levels of fixed operating overhead than us, which enables them to be profitable with lower priced products. In order to remain competitive with these and other companies, we must continue to commit a significant portion of our personnel, financial resources, research and development and customer support to developing new products and maintaining customer relationships worldwide.

Our competitors include independent manufacturers, ATE manufacturers and, to a lesser extent, semiconductor manufacturers' in-house ATE interface groups. Competitive factors in the markets we serve include price, functionality, timely product delivery, customer service, applications support, product performance and reliability. We believe that our long-term relationships with our customers in the various markets we support and our commitment to, and reputation for, providing high quality products, are important elements in our ability to compete effectively in all of our markets.

Our principal competitors for Thermostream(R) products are FTS Systems, a part of SP Industries, and MPI Corporation. Our principal competitors for environmental chambers are Cincinnati Sub-Zero Products, Inc., Espec Corp. and Thermotron Industries. Our principal competitor for thermal platforms is Environmental Stress Systems Inc. Our principal competitors for liquid chillers include Huber Kältemaschinenbau AG, Julabo GmbH, Boyd Corporation, and Advanced Thermal Sciences Corporation. Our principal competitors for life sciences products include Panasonic Health Care Holdings Corporation, Haier Group Corporation, Thermo Fisher Scientific Corporation, and Eppendoerf AG. Our principal competitors for EKOHEAT(R) and EASYHEAT™ products are Inductotherm Corporation, Park-Ohio Holdings, EFD Induction Corporation, Trumpf Huettinger GmbH, Ultraflex Power Technologies and CEIA SpA.

Our digital streaming and image capturing solutions products compete in a large space with multiple small competitors. There is no competitor that has over 5% share of the current market.

Our principal competitors for manipulator products are Advantest Corporation, Esmo AG, Reid-Ashman Manufacturing and Teradyne, Inc. Our principal competitors for docking hardware products include Advantest Corporation, Esmo AG, Knight Automation, Reid-Ashman Manufacturing and Teradyne, Inc. Our principal competitors for tester interface products are Advantest Corporation, Esmo AG, Reid-Ashman Manufacturing and Teradyne, Inc. Our principal competitors for Acculogic products are Digitaltest GmbH, Seica S.P.A., SPEC S.P.A., and Takaya Corporation.

BACKLOG

At December 31, 2021, our backlog of unfilled orders for all products was $34.1 million compared with $11.5 million at December 31, 2020. Our backlog includes customer orders that we have accepted, substantially all of which we expect to deliver in 2022. While backlog is calculated on the basis of firm purchase orders, a customer may cancel an order or accelerate or postpone currently scheduled delivery dates. Our backlog may be affected by the tendency of customers to rely on shorter lead times available from suppliers, including us, in periods of depressed demand. In periods of increased demand, there is a tendency towards longer lead times, which has the effect of increasing backlog. As a result of these factors, our backlog at a particular date is not necessarily indicative of sales for any future period.

EMPLOYEES

At December 31, 2021, we had 316 employees (303 of which were full-time), including 154 in manufacturing operations, 106 in customer support/operations and 43 in administration. Substantially all of our key employees are highly skilled and trained technical personnel. None of our employees are represented by a labor union, and we have never experienced a work stoppage. From time to time, we retain third-party contractors to assist us in manufacturing operations and engineering and product development projects.

COVID-19 PANDEMIC

We are following the guidance of the Centers for Disease Control and Prevention (the “CDC”) and the local regulatory authorities in regions outside the U.S. While we are no longer requiring employees to wear masks indoors in our domestic locations, we are encouraging all employees to receive COVID-19 vaccinations and boosters, if possible. We are continuing to conduct temperature screenings and encourage all employees to maintain social distancing when applicable. We are also continuing to allow employees to work remotely either part-time or full-time in circumstances when possible. While the negative impact of COVID-19 on our business was reduced significantly throughout 2021, the spread of the virus or variants of the virus could worsen and one or more of our significant customers or suppliers could be impacted, or significant additional governmental regulations and restrictions could be imposed, thus negatively impacting our business in the future. We continue to monitor the situation closely in the regions in which we operate in the U.S. and abroad and will adjust our operations as necessary to protect the health and well-being of our employees. To the extent that further governmental mandates or restrictions are implemented in the future, we currently expect to be able to continue to operate our business in a manner similar to how we have operated over the past year.

ADDITIONAL INFORMATION

Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to these reports that are filed with the SEC pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (“Exchange Act”), are available free of charge through our website (www.intest.com) as soon as reasonably practicable after we electronically file them with, or furnish them to, the SEC. We also routinely post press releases, presentations, webcasts and other information regarding the Company on our website. The information posted to our website is not part of this Report.

The following are some of the factors that could materially and adversely affect our future performance or could cause actual results to differ materially from those expressed or implied in our forward-looking statements. The risks and uncertainties described below are not the only risks facing us and we cannot predict every event and circumstance that may adversely affect our business. However, these risks and uncertainties are the most significant factors that we have identified at this time. If one or more of these risks actually occurs, our business, results of operations and/or financial condition could suffer, and the price of our stock could be negatively affected.

RISKS RELATED TO OUR ACQUISITION AND GROWTH STRATEGY

We seek to grow our business through the acquisition of additional businesses. If we are unable to do so, our future rate of growth may be reduced or limited. We may incur significant expenses related to due diligence or other transaction-related expenses for a proposed acquisition that may not be completed.

A key element of our growth strategy is to acquire businesses, technologies or products that are complementary to our current product offerings. For example, we completed the acquisitions of Z-Sciences (now North Sciences), Videology and Acculogic in 2021. We seek to make acquisitions that will further expand our product lines as well as strengthen our positions in served markets and provide expansion into new markets. We may not be able to execute our acquisition strategy and our future growth may be limited if:

We may incur significant expenses related to due diligence or other transaction-related expenses for a proposed acquisition that may not be completed, which may have a material adverse effect on our financial condition and results of operations.

Our acquisition strategy involves financial and management risks which may adversely affect our results in the future.

With respect to the acquisitions we completed in 2021 and if we acquire additional businesses, technologies or products, we will face the following additional risks:

If any of the events described above occur, our earnings could be reduced and may adversely affect our financial condition, results of operations and ability to grow our business or otherwise achieve our financial and strategic objectives. If we issue shares of our stock or other rights to purchase our stock in connection with any future acquisitions, we would dilute our existing stockholders' interests and our earnings per share may decrease. If we issue or incur debt in connection with any future acquisitions, lenders may require that we pledge our assets to secure repayment of such debt and impose covenants on us, which could, among other things, restrict our ability to increase capital expenditures or to acquire additional businesses.

We may attempt to acquire a business that would require us to issue equity or incur significant debt from third parties. If we are unable to secure sufficient financing at terms that are acceptable to us, we may not be able to close the proposed acquisition. Additionally, should we incur significant debt, we may not be able to achieve compliance with all covenants related to the debt depending on our financial results in future periods.

In connection with our acquisition strategy, we may pursue potential acquisition opportunities which could require us to issue equity or obtain significant third-party financing to close the proposed transaction. We may encounter difficulties in securing necessary financing at terms that would be acceptable to us and may not be able to close on the proposed acquisition. In addition, should we incur significant third-party debt, our future financial results may be negatively impacted by external factors, such as an economic recession, which may impact our ability to achieve compliance with any covenants related to the debt as well as make the required payments under the terms of the indebtedness.

We may acquire businesses in the future and utilize an earnout structure as we have done in prior transactions we have closed. In connection with the earnout, we may be required to accrue significant increases or decreases to the contingent consideration liability we would establish. These adjustments to the contingent consideration liability could cause our results of operations to have increased variability, which may negatively impact our stock’s trading price.

We may utilize an earnout structure on future acquisitions as we have done in prior transactions we have closed. The initial contingent consideration liability is established as part of the accounting for the business combination. In subsequent periods, we are required to estimate the fair value of the contingent consideration associated with any earnout on a quarterly basis and record an adjustment to the contingent consideration liability in our results of operations for the period concerned. The contingent consideration adjustment we record quarterly may cause increased variability in our future results of operations, which may cause fluctuations in our stock price.

In connection with our acquisition of Acculogic we have recorded a contingent consideration liability that represents the fair value of additional payments we may make to the seller of up to an additional CAD $5.0 million in the five-year period from 2022 through 2026. The additional payments will be based on a percent of net invoices for which payments have been received on systems sold to EV or battery customers in excess of CAD $2.5 million per year in each of the five years. The maximum payment is capped at CAD $5.0 million, which equates to approximately $4.0 million at December 31, 2021. The fair value of this contingent consideration liability involves assessing the total amount of revenue we expect from sales to EV or battery customers during the applicable time periods as well as when we expect to receive payment for the related net invoices. As of December 31, 2021, the contingent consideration liability on our balance sheet was $930,000. Our allocation of the purchase price for Acculogic was not yet complete as of December 31, 2021 and this provisional amount may change. Once we have completed our purchase price allocation and finalized this amount, any future adjustments to the estimated fair value of the contingent liability will be recorded in our results of operations for the period in which the adjustment occurs.

We may not be able to effectively manage our growth and operations, which could materially and adversely affect our business.

As we implement our business strategy as intended, we have and may in the future experience rapid growth and development in a relatively short period of time. The management of this growth will require, among other things, continued development of our financial and management controls and management information systems, stringent control of costs, the ability to attract and retain qualified management personnel and the training of new personnel. Failure to successfully manage our possible growth and development could have a material adverse effect on our business.

There is a risk that some or all of the anticipated strategic and financial benefits may fail to materialize, may not continue on their existing terms, or may not occur within the time period anticipated. Although we have conducted due diligence with respect to material aspects of the development of our business, there is no certainty that our due diligence procedures will reveal all of the risks and liabilities associated with our current plans. Although we are not aware of any specific liabilities, such liabilities may be unknown and, accordingly, the potential monetary cost of such liability is also unknown.

RISKS RELATED TO OUR MARKETS

Our sales are affected by the cyclicality of the Semi Market, which causes our operating results to fluctuate significantly.

A significant portion of our business depends upon the capital expenditures of semiconductor manufacturers. Capital expenditures by these companies depend upon, among other things, the current and anticipated market demand for semiconductors and the products that utilize them. Typically, semiconductor manufacturers curtail capital expenditures during periods of economic downturn. Conversely, semiconductor manufacturers increase capital expenditures when market demand requires the addition of new or expanded production capabilities or the reconfiguration of existing fabrication facilities to accommodate new products. These market changes have contributed in the past, and will likely continue to contribute in the future, to fluctuations in our operating results.

We seek to further diversify the markets for our products in order to increase the proportion of our sales attributable to markets which are less subject to cyclicality than the Semi Market. If we are unable to do so, our future performance will remain substantially exposed to the fluctuations of the cyclicality of the Semi Market.

We sell certain of our products in markets outside of the Semi Market, including the automotive, defense/aerospace, industrial, life sciences and security markets. We refer to these other markets collectively as Multimarket. During 2021 and 2020, our Multimarket sales were $30.0 million and $27.0 million, respectively, and represented 35% and 50% of our consolidated revenue, respectively. Our goal is to increase our Multimarket sales; however, in most cases, the expansion of our product sales into these new markets has occurred in the last several years, and we may experience difficulty in expanding our sales efforts further into these markets. These difficulties could include hiring sales and marketing staff with sufficient experience selling into these new markets and our ability to continue to develop products which meet the needs of customers in these markets and which are not currently offered by our competitors. In addition, due to the highly specialized nature of certain of our product offerings in Multimarket, we do not expect broad market penetration in many of these markets. If we are unable to expand our Multimarket sales, our revenue and results of operations will remain substantially dependent upon the cycles of the Semi Market.

RISKS RELATED TO OUR BUSINESS OPERATIONS

The efficiencies or benefits we expect from the consolidation of our EMS manufacturing operations may not be realized and the significant reduction in the amount of manufacturing space may not be sustainable which could result in higher-than-expected costs in future periods, a negative impact on our reputation and lost business opportunities.

On September 21, 2020, we notified employees in our Fremont, California facility of a plan to consolidate all manufacturing operations for our EMS segment into our manufacturing operations located in Mt. Laurel, New Jersey. Prior to the consolidation, our interface products were manufactured in the Fremont facility, and our manipulator and docking hardware products were manufactured in the Mt. Laurel facility. The consolidation was substantially completed during the fourth quarter of 2020. During 2021, we also reduced the size of our manufacturing facility in Mt. Laurel from approximately 55,000 square feet to approximately 34,000 square feet. The consolidation of manufacturing operations and footprint reduction in the Mt. Laurel facility were undertaken to better serve customers through streamlined operations and reduce the fixed annual operating costs for the EMS segment. A small engineering and sales office is being maintained in northern California. If we do not achieve the efficiencies and benefits we currently anticipate as a result of the consolidation, or if we determine that the reduction in manufacturing space is not sustainable, our costs could be higher than we currently expect in future periods which could have a material adverse effect on our business, results of operations and financial condition in future periods.

If our suppliers do not meet product or delivery requirements, or inflationary pressures continue to increase and we cannot increase our prices to our customers, we could have reduced revenues and earnings.

During 2021, as global supply chain constraints became more pronounced, we experienced price increases and lack of availability from several of our normal suppliers for the materials needed to produce our products in a timely manner and/or with the level of margins we typically expect to achieve. Certain components of our products may continue to be in short supply from time to time because of high demand or the inability of some vendors to consistently meet our quality or delivery requirements. A significant portion of our material purchases require some custom work, and there are not always multiple suppliers capable of performing such custom work on a timely or cost-effective basis. If any of our suppliers were to cancel commitments or fail to meet quality or delivery requirements needed to satisfy customer orders for our products, we could lose time-sensitive customer orders, have reduced revenues and earnings, and be subject to contractual penalties, any of which could have a material adverse effect on our business, results of operations and financial condition. Additionally, we may not be able to raise our prices to our customers in an amount or timeframe sufficient to offset the increases in price we are experiencing from our suppliers. This could result in a reduction in our earnings in future periods.

A breach of our operational or security systems could negatively affect our business, our reputation and results of operations.

We rely on various information technology networks and systems, some of which are managed by third parties, to process, transmit and store electronic information, including confidential data, and to carry out and support a variety of business activities, including manufacturing, research and development, supply chain management, sales and accounting. A failure in, or a breach of, our operational or security systems or infrastructure, or those of our suppliers and other service providers, including as a result of cyberattacks, could disrupt our business, result in the disclosure or misuse of proprietary or confidential information, result in litigation, damage our reputation, cause losses and significantly increase our costs. Although we have been the target of security breaches in the past, we have not experienced material losses to date related to such incidents. Nevertheless, there can be no assurance that we will not suffer such losses in the future. In addition, domestic and international regulatory agencies have implemented, and are continuing to implement, various reporting and remediation requirements that companies must comply with upon learning of a breach. While we have insurance that may protect us from incurring some of these costs, there is no assurance that such insurance coverage is adequate to cover all costs and damages incurred in connection with a cyberattack. 

Our business may suffer if we are unable to attract and retain key employees or hire personnel at the costs we currently project.

Our future success will depend largely upon the continued services of our senior management and other key employees or the development of successors with commensurate skills and talents in a timely fashion and at the costs we project. If we cannot continue to increase employee salaries and maintain employee benefits commensurate with competitive opportunities, we may not be able to retain our senior management and other key employees. The loss of key personnel could adversely affect our ability to manage our business effectively and could increase our costs in future periods.

We have recently experienced difficulty in hiring personnel at the costs projected in our forecasts. This has resulted in the need to increase the labor rates offered for certain positions. If we cannot find savings in other areas or increase the price for which we sell our products in an amount sufficient to cover these additional labor costs, we may experience reduced margins in future periods.

We have experienced and may continue to experience significant variability in our effective tax rates and may have exposure to additional tax liabilities and costs.

We are subject to income taxes in the U.S. and various other countries in which we operate. Our effective tax rate is dependent on where our earnings are generated and the tax regulations and the interpretation and judgment of administrative tax or revenue entities in the U.S. and other countries. We are also subject to tax audits in the countries where we operate. Any material assessment resulting from an audit from an administrative tax or revenue entity could negatively affect our financial results.

The terms and covenants relating to our credit facility could adversely impact our ability to pursue our strategy and our financial performance and liquidity, and thus we may need additional financial resources to maintain our liquidity.

Our credit facility contains covenants requiring us to, among other things, provide financial and other information and to provide notice upon the occurrence of certain events affecting us or our business. These covenants also place restrictions on our ability to incur additional indebtedness, and enter into certain transactions, including selling assets, engaging in mergers or acquisitions, or engaging in transactions with affiliates. If we fail to satisfy one or more of the covenants under our credit facility, we would be in default thereunder, and may be required to repay such debt with capital from other sources or otherwise not be able to draw down against our facility. Under such circumstances, we may have difficulty in locating another lender that would be willing to extend credit to us, and other sources of capital may not be available to us on reasonable terms or at all.

RISKS RELATED TO OUR CUSTOMER BASE

Changes in the buying patterns of our customers have affected, and may continue to affect, demand for our products and our gross and net operating margins. Such changes in patterns are difficult to predict and may not be immediately apparent.

In addition to the cyclicality of the Semi Market, demand for our products and our gross and net operating margins have also been affected by changes in the buying patterns of our customers. Some of the changes in customer buying patterns that have impacted us in the past, and may continue to do so in the future, have included customers placing heightened emphasis on shorter lead times (which places increased demands on our available engineering and production capacity and may result in increasing unit costs) and ordering in smaller quantities (which prevents us from acquiring component materials in larger volumes at lower unit costs.) We have also experienced customer supply chain management groups demanding lower prices and spreading purchases across multiple vendors. We believe some of the changes in customer buying patterns are the result of changes within the Semi Market over the last several years, including, for example, changing product requirements and longer time periods between new product offerings by OEMs. Such shifts in market practices have had, and may continue to have, varying degrees of impact on our revenue and our gross and net operating margins. Such shifts are difficult to predict and may not be immediately apparent, and the impact of these practices is difficult to quantify from period to period. There can be no assurance that we will be successful in implementing effective strategies to counter these shifts. 

We generate a large portion of our sales from a small number of customers. If we were to lose one or more of our large customers, our operating results could suffer dramatically.

During the year ended December 31, 2021, Texas Instruments Incorporated accounted for 13% of our consolidated revenue. While both of our operating segments sold products to this customer, this revenue was primarily generated by our EMS segment. During the year ended December 31, 2021, no other customer accounted for 10% or more of our consolidated revenue. During the year ended December 31, 2020, no customer accounted for 10% or more of our consolidated revenue. Our ten largest customers accounted for approximately 43% and 35% of our consolidated revenue in 2021 and 2020, respectively. The loss of any one or more of our largest customers, or a reduction in orders by a major customer could materially reduce our net revenues or otherwise materially affect our business, financial condition or results of operations.

RISKS RELATED TO COMPETITION

Our business is subject to intense competition, which has in the past and could in the future, materially adversely affect our business, financial condition and results of operations.

We face significant competition throughout the world in each of our operating segments. Some of our competitors have substantial financial resources and more extensive design and production capabilities than us. Some of our competitors are much smaller than we are, and therefore have much lower levels of overhead than us, which enables them to sell their competing products at lower prices. In order to remain competitive, we must continually commit a significant portion of our personnel and financial resources to developing new products and maintaining customer satisfaction worldwide. We expect our competitors to continue to improve the performance of their current products and introduce new products or technologies. In the recent past, in response to significant declines in global demand for our products, some competitors have reduced their product pricing significantly, which has led to intensified price-based competition, which has and could continue to materially adversely affect our business, financial condition and results of operations. 

Our industry is subject to rapid technological change, and our business prospects would be negatively affected if we are unable to quickly and effectively respond to innovation in the Semi Market.

Semiconductor technology continues to become more complex as manufacturers incorporate ICs into an increasing variety of products. This trend, and the changes needed in automated testing systems to respond to developments in the semiconductor market, are likely to continue. We cannot be certain that we will be successful or timely in developing, manufacturing or selling products that will satisfy customer needs or that will attain market acceptance. Our failure to provide products that effectively and timely meet customer needs or gain market acceptance will negatively affect our business prospects.  

RISKS RELATED TO FOREIGN OPERATIONS

The current conflict in the Ukraine could disrupt our supply chain or cause other adverse effects on our revenue and earnings.

In late February 2022, Russia initiated significant military action against Ukraine. In response, the U.S. and certain other countries imposed significant sanctions and trade actions against Russia, and the U.S. and certain other countries could impose further sanctions, trade restrictions and other retaliatory actions should the conflict continue or worsen. It is not possible to predict the broader consequences of the conflict, including related geopolitical tensions, and the measures and retaliatory actions taken by the U.S. and other countries in respect thereof, as well as any counter measures or retaliatory actions by Russia in response. At a minimum, the continuing conflict is likely to cause regional instability, geopolitical shifts and could materially adversely affect global trade, currency exchange rates, regional economies and the global economy, which could materially adversely affect our financial condition or results of operations. In addition, the conflict and actions taken in response to the conflict could increase our costs or disrupt our supply chain for certain material which Acculogic currently acquires from a key sole-source supplier in Belarus. If we cannot find an alternate supplier for this material, our revenue and earnings could be adversely affected.

A substantial portion of our customers are located outside the U.S., which exposes us to foreign political and economic risks.

We have operated internationally for many years and expect to expand our international operations to continue expansion of our sales and service to our non-U.S. customers. Our foreign subsidiaries generated 13% and 14% of consolidated revenue in 2021 and 2020, respectively. Revenue from foreign customers totaled $58.1 million, or 68% of consolidated revenue in 2021, and $31.6 million, or 59% of consolidated revenue in 2020. We expect our revenue from foreign customers will continue to represent a significant portion of total revenue. In addition to the risks generally associated with sales and operations in the U.S., sales to customers outside the U.S. and operations in foreign countries are subject to additional risks, which may, in the future, affect our operations. These risks include:

\

A significant portion of our cash position is maintained overseas and we may not be able to repatriate cash from overseas when necessary, which could have an adverse effect on our financial condition.

While much of our cash is in the U.S., a significant portion is generated from and maintained by our foreign operations. As of December 31, 2021, $4.0 million, or 19%, of our cash and cash equivalents were held by our foreign subsidiaries. Our financial condition and results of operations could be adversely impacted if we are unable to maintain a sufficient level of cash flow in the U.S. to address our cash requirements and if we are unable to efficiently and timely repatriate cash from overseas. Any payment of distributions, loans or advances to us by our foreign subsidiaries could be subject to restrictions on, or taxation of, dividends or repatriation of earnings under applicable local law, monetary transfer restrictions and foreign currency exchange regulations in the jurisdictions in which our subsidiaries operate. If we are unable to repatriate the earnings of our subsidiaries, it could have an adverse impact on our ability to redeploy earnings in other jurisdictions where they could be used more profitably.

RISKS RELATED TO COVID-19

Our business, results of operations and financial condition and the market price of our common stock have been and may continue to be adversely affected by the COVID-19 pandemic.

While the negative impact of COVID-19 on our business was reduced significantly throughout 2021, the spread of the virus or variants of the virus could worsen and one or more of our significant customers or suppliers could be impacted, or significant additional governmental regulations and restrictions could be imposed, thus negatively impacting our business in the future.

We have had occasions where one or more employees have contracted COVID-19 and entered our facilities while infected. We have managed these occurrences with minimal disruption to our business while protecting other employees, but there can be no assurances that we can avoid similar occurrences in the future or that, in such cases, we can avoid significant disruption of our operations as a result of such occurrences. Should this occur, or should we have employees who become ill or otherwise are unable to work as a result of COVID-19, we may experience limitations in employee resources or may be required to close affected facilities for a time to clean and disinfect appropriately, and allow employees to quarantine, as appropriate.

We rely on a relatively few number of customers for a significant portion of our sales. The spread of the virus or variants of the virus could worsen and one or more of our significant customers could be impacted. If one or more of our significant customers is negatively impacted, our business, results of operations and financial condition will be adversely affected. In addition, the aftermarket service and support that we provide to our customers has been adversely affected by COVID-19 in the past due to travel restrictions and limitations on visitors allowed into customer facilities, which resulted in some of these activities being reduced or suspended. If the spread of the virus or variants of the virus were to worsen and travel restrictions and limitations were to be reinstated, this portion of our business could be adversely affected in the future.

Generally, global supply chains and the timely availability of products have been materially disrupted by quarantines, factory slowdowns or shutdowns, border closings and travel restrictions resulting from COVID-19 in the past. If the spread of the virus or variants worsens and one or more of our significant suppliers is negatively impacted in the future, we could experience delays in receipt of materials or price increases in the future which could have a material negative impact on our business, results of operations and financial condition.

The adverse effects of COVID-19 on our business could be material in future periods, particularly if there are significant and prolonged economic slowdowns in regions where we derive a significant amount of our revenue or profit, or where our suppliers are located, or if we are forced to close facilities and limit or cease manufacturing operations for extended periods of time. We could experience delays in receipt of customer orders, cancellation or postponement of existing orders. Further, as a result of COVID-19, our ability to fulfill orders within the proposed parameters at the time of order, including within the approximated timeline and estimated cost, may be negatively affected. This could lead to a reduction in revenue and/or an increase in our cost of revenues in future periods and could have a material adverse effect on our business, results of operations and financial condition. COVID-19 has also led to extreme volatility in capital markets and has adversely affected, and may adversely affect, the market price of our common stock in the future. As a result of any negative impact of COVID-19 on our business, results of operations, financial condition and cash flows, we may determine that our goodwill and long-lived assets are impaired, which would result in recording an impairment charge. The amount of any such impairment charge could be material.

RISKS RELATED TO INTELLECTUAL PROPERTY

Claims of intellectual property infringement by or against us could seriously harm our businesses.

From time to time, we may be forced to respond to or prosecute intellectual property infringement claims to defend or protect our rights or a customer's rights. These claims, regardless of merit, may consume valuable management time, result in costly litigation or cause product shipment delays. Any of these factors could seriously harm our business and operating results. We may have to enter into royalty or licensing agreements with third parties who claim infringement. These royalty or licensing agreements, if available, may be costly to us. If we are unable to enter into royalty or licensing agreements with satisfactory terms, our business could suffer. In instances where we have had reason to believe that we may be infringing the patent rights of others, or that someone may be infringing our patent rights, we have asked our patent counsel to evaluate the validity of the patents in question, as well as the potentially infringing conduct. If we become involved in a dispute, neither the third parties nor the courts are bound by our counsel's conclusions. 

RISKS RELATED TO OUR OPERATING RESULTS AND STOCK PRICE

Our operating results often change significantly from quarter to quarter and may cause fluctuations in our stock price.

Historically, our operating results have fluctuated significantly from quarter to quarter. We believe that these fluctuations occur primarily due to the cycles of demand in the semiconductor manufacturing industry. In addition to these changing cycles of demand, other factors that have caused our quarterly operating results to fluctuate in the past or that may cause fluctuations and losses in the future, include:

Because the market price of our common stock has tended to vary based on, and in relation to, changes in our operating results, fluctuations in the market price of our stock are likely to continue as variations in our quarterly results continue.

None.

At December 31, 2021, we leased twelve facilities worldwide. The following chart provides information regarding each of our principal facilities that we leased at December 31, 2021:

All of our facilities have space to accommodate our needs for the foreseeable future.

From time to time we may be a party to legal proceedings occurring in the ordinary course of business. We are not currently involved in any material legal proceedings.

Not applicable. 

PART II

Market for Common Stock
 

Our common stock is traded on NYSE American LLC (“NYSE American”) under the symbol "INTT." On March 15, 2022, the closing price for our common stock as reported on the NYSE American was $9.76. As of March 15, 2022, we had 10,956,872 shares outstanding that were held by approximately 1,000 beneficial and record holders.

No dividends were paid on our common stock in the years ended December 31, 2021 or 2020. We do not currently plan to pay cash dividends in the foreseeable future. Our current policy is to use any future earnings for reinvestment in the operation and expansion of our business, including possible acquisitions of other businesses, technologies or products and, when approved by our Board of Directors, to repurchase our outstanding common stock. Payment of any future dividends will be at the discretion of our Board of Directors.

Purchases of Equity Securities

There were no shares of our common stock repurchased by us or on our behalf during the three months ended December 31, 2021.

On July 31, 2019, our Board of Directors authorized the repurchase of up to $3 million of our common stock from time to time on the open market, in compliance with Rule 10b-18 under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or in privately negotiated transactions pursuant to a newly authorized stock repurchase plan (the “2019 Repurchase Plan”). Repurchases are to be made under a Rule 10b5-1 plan entered into with RW Baird & Co., which permits shares to be repurchased when we might otherwise be precluded from doing so under insider trading laws and our internal trading windows. The 2019 Repurchase Plan does not obligate us to purchase any particular amount of common stock and can be suspended or discontinued at any time without prior notice. The 2019 Repurchase Plan is funded using our operating cash flow or available cash. Purchases began on September 18, 2019 under this plan. On March 2, 2020, we suspended repurchases under the 2019 Repurchase Plan. From the adoption of the 2019 Repurchase Plan through the suspension of the plan, we repurchased a total of 243,075 shares at a cost of $1.2 million, which includes fees paid to our broker of $6,000. All of the repurchased shares were retired.

Overview
 

This MD&A should be read in conjunction with the accompanying consolidated financial statements. In addition, please refer to the discussion of our business and markets contained in Part 1, Item 1 of this Report.

We are a global supplier of innovative test and process solutions for use in manufacturing and testing across a wide range of markets including automotive, defense/aerospace, industrial, life sciences, security and semiconductor. During the period covered by this report, we managed our business as two operating segments: Thermal and EMS. Our Thermal segment designs, manufactures and sells our thermal test and thermal process products. This segment also includes the operations of North Sciences (formerly Z-Sciences) and Videology, both of which we acquired in October 2021 and which are discussed below. Our EMS segment designs, manufactures and sells our semiconductor test products. This segment also includes the operations of Acculogic, which we acquired in December 2021 and which is discussed below.

Both of our operating segments have multiple products that we design, manufacture and market to our customers. Due to a number of factors, our products have varying levels of gross margin. These factors include, for example, the amount of engineering time required to develop the product, the market or customer to which we sell the product and the level of competing products available from other suppliers. The needs of our customers ultimately determine the products that we sell in a given time period. Therefore, the mix of products sold in a given period can change significantly when compared against the prior period. As a result, our consolidated gross margin may be significantly impacted by a change in the mix of products sold in a particular period.

Markets

As discussed further in Part 1, Item 1 “Markets”, we are focused on specific target markets which include automotive, defense/aerospace, industrial, life sciences, as well as both the front-end and back-end of the semiconductor manufacturing industry. Our largest market is the semiconductor industry which represent the roots of inTEST’s engineered product history. We refer to our markets as “Semi Market” and “Multimarket” and expect in the future to further break out our sales and orders by the key target markets on which we are focused.  

The portion of our business that is derived from the Semi Market is substantially dependent upon the demand for ATE by semiconductor manufacturers and companies that specialize in the testing of ICs and, for our induction heating products, the demand for wafer processing equipment. Demand for ATE or wafer processing equipment is driven by semiconductor manufacturers that are opening new, or expanding existing, semiconductor fabrication facilities or upgrading equipment, which in turn is dependent upon the current and anticipated market demand for ICs and products incorporating ICs. Such market demand can be the result of market expansion, development of new technologies or redesigned products to incorporate new features, or the replacement of aging equipment. In addition, as discussed further in Part 1, Item 1 “Overview and Strategy” we continue to focus on broadening our customer base and our product portfolio with the goal of growing our revenue in the Semi Market as our current customers adopt these new products or we gain new customers for our existing and new products.

In the past, the Semi Market has been highly cyclical with recurring periods of oversupply, which often severely impact the Semi Market's demand for the products we manufacture and sell into the market. This cyclicality can cause wide fluctuations in both our orders and revenue and, depending on our ability to react quickly to these shifts in demand, can significantly impact our results of operations. Market cycles are difficult to predict and, because they are generally characterized by sequential periods of growth or declines in orders and revenue during each cycle, year over year comparisons of operating results may not always be as meaningful as comparisons of periods at similar points in either up or down cycles. These periods of heightened or reduced demand can shift depending on various factors impacting both our customers and the markets that they serve. In addition, during both downward and upward cycles in the Semi Market, in any given quarter, the trend in both our orders and revenue can be erratic. This can occur, for example, when orders are canceled or currently scheduled delivery dates are accelerated or postponed by a significant customer or when customer forecasts and general business conditions fluctuate during a quarter.

While a significant portion of our orders and revenue are derived from the Semi Market, and our operating results generally follow the overall trend in the Semi Market, in any given period we may experience anomalies that cause the trend in our revenue to deviate from the overall trend in the Semi Market. We believe that these anomalies may be driven by a variety of factors within the Semi Market, including, for example, changing product requirements, longer periods between new product offerings by OEMs and changes in customer buying patterns. In addition, in recent periods, we have seen instances when demand within the Semi Market is not consistent for each of our operating segments or for any given product within a particular operating segment. This inconsistency in demand can be driven by a number of factors but, in most cases, we have found that the primary reason is unique customer-specific changes in demand for certain products driven by the needs of their customers or markets served. Recently this has become more pronounced for our sales into the wafer processing sector within the broader semiconductor market due to the limited market penetration we have into this sector and the variability of orders we have experienced from the few customers we support. These shifts in market practices and customer-specific needs have had, and may continue to have, varying levels of impact on our operating results and are difficult to quantify or predict from period to period. Management has taken, and will continue to take, such actions it deems appropriate to adjust our strategies, products and operations to counter such shifts in market practices as they become evident.

As discussed further in Part 1, Item 1 “Overview and Strategy”, although the Semi Market remains our largest market, as part of our strategy to grow our business, we are focused on several other key target markets where we believe our products address test and process requirements and where we believe there is significant potential for growth. These target markets include the automotive, defense/aerospace, industrial, life sciences, security and other markets, which we refer to as Multimarket. We believe that these markets are usually less cyclical than the Semi Market. While market share statistics exist for some of these markets, due to the nature of our highly specialized product offerings in these markets, we do not expect broad market penetration in many of these markets and, therefore, do not anticipate developing meaningful market shares in most of these markets.

In addition, because of our limited market share, our Multimarket orders and revenue in any given period do not necessarily reflect the overall trends in the markets within Multimarket. Consequently, we are continuing to evaluate buying patterns and opportunities for growth in Multimarket that may affect our performance. The level of our Multimarket orders and revenue has varied in the past, and we expect will vary significantly in the future, as we work to build our presence in Multimarket and establish new markets for our products.

Acquisitions

A key element to our strategy for growth is through acquisitions. During 2021, we completed three acquisitions that expanded our technology offerings, diversified our markets and customers and expanded our reach into Europe.

On October 6, 2021, we acquired substantially all of the assets of Z-Sciences (now North Sciences), a developer of ultra-cold storage solutions for the life sciences cold chain market.  This small, tuck-in transaction enhances our technology, adds new talent, and provides a low-cost entry into this fast growing, fragmented market. This business is being integrated into our Thermal segment.

On October 28, 2021, we acquired substantially all of the assets of Videology, a global designer, developer and manufacturer of OEM digital streaming and image capturing solutions, for approximately $12.1 million.  The acquisition expanded our process technology offerings, diversified our reach into key target markets and broadened our customer base.  This business also is being integrated into our Thermal segment.

On December 21, 2021, we acquired Acculogic, a global manufacturer of robotics-based electronic production test equipment and application support services, for approximately $9.3 million. The acquisition expanded our global reach and enhanced our product portfolio with leading technologies and automation services. This business is being integrated into our EMS segment.

Credit Facility

As discussed further in Note 12 to our consolidated financial statements in this Report, on October 15, 2021, we entered into into an Amended and Restated Loan and Security Agreement (the “October 2021 Agreement”) with M&T Bank (“M&T”). The October 2021 Agreement includes a $25 million non-revolving delayed draw term note (the “Term Note”) and a $10 million revolving credit facility and replaces our prior credit facility with M&T. The October 2021 Agreement has a five-year contract period that expires on October 15, 2026, and draws under the Term Note will be permissible for two years. The principal balance of the revolving credit facility and the principal balance of any amount drawn under the Term Note will accrue interest based on the Secured Overnight Financing Rate or a bank-defined base rate plus an applicable margin, depending on leverage. The October 2021 Agreement includes customary affirmative, negative and financial covenants, including a maximum ratio of consolidated funded debt to consolidated EBITDA and a fixed charge coverage ratio. Our obligations under the October 2021 Agreement are secured by liens on substantially all of our tangible and intangible assets. On October 28, 2021, we drew $12 million under the Term Note to finance the acquisition of Videology discussed above. We also entered into an interest rate swap agreement with M&T as of this date which is designed to protect us against fluctuations in interest rates during the five-year repayment and amortization period. As a result, the annual interest rate we expect to pay for this draw under the Term Note is fixed at approximately 3.2% based on current leverage. On October 28, 2021, the October 2021 Agreement was amended to include our subsidiary, Videology Imaging Corporation, as a subsidiary guarantor thereunder.

On December 29, 2021, we drew $8.5 million under the Term Note to finance the acquisition of Acculogic discussed above. We did not enter into an interest rate swap agreement with M&T related to this draw. The annual interest rate we expect to pay for this draw under the Term Note is variable. At December 31, 2021, it was approximately 2.1% based on current leverage. On December 29, 2021, the October 2021 Agreement was amended to include our subsidiaries, Acculogic Ltd. and Acculogic Inc., as subsidiary guarantors thereunder.

Restructuring and Other Charges

On September 21, 2020, we notified employees in our Fremont, California facility of a plan to consolidate all manufacturing for our EMS segment into our manufacturing operations located in Mt. Laurel, New Jersey. Prior to the consolidation, our interface products were manufactured in the Fremont facility, and our manipulator and docking hardware products were manufactured in the Mt. Laurel facility. The consolidation was undertaken to better serve customers through streamlined operations and reduce the fixed annual operating costs for the EMS segment. A small engineering and sales office is being maintained in northern California. The integration of our EMS manufacturing operations took longer than originally anticipated primarily as a result of the significant increase in our business activity in 2021. We completed the integration during the third quarter of 2021. The costs related to these actions are included in restructuring and other charges on our consolidated statement of operations and are discussed in more detail in Note 5 to our consolidated financial statements in this Report.

Orders and Backlog

The following table sets forth, for the periods indicated, a breakdown of the orders received by operating segment and market (in thousands).

Total consolidated orders for the year ended December 31, 2021 were $101.9 million compared to $59.7 million in 2020, an increase of $42.2 million, or 71%. Orders from acquired businesses in 2021 (from the respective dates of acquisition through December 31, 2021) totaled $2.5 million, all of which was attributable to Multimarket.

Orders from the Semi Market in 2021 more than doubled from the level we received in 2020. We believe this significant level of increase reflects multiple factors, including the impact of higher demand for semiconductors (also referred to as “integrated circuits” or “ICs”), generally, which has led to the current shortage in the global supply. We believe this surge in the demand for semiconductors is being driven both by changing technology as well as increased use of technology across all aspects of daily life, such as in devices that facilitate remote work and education, smart technology used in homes and businesses, the increase in the number of ICs used in the automotive industry and changes occurring in the telecommunications and mobility markets. In addition, during the fourth quarter of 2021 we received a $10.0 million order from one front-end Semi Market customer of our Thermal segment which will ship throughout 2022. This was the largest single order ever received by us.

Multimarket orders for the year ended December 31, 2021 increased 22% as compared to the same period in 2020. This increase was primarily from the automotive market, which includes the electric vehicle (“EV”) market. During the third quarter of 2021, we received a significant order from one of our EV customers which we expect to ship over the next several quarters. It is important to note that we have seen an increasing tendency by certain of our customers, particularly those in Multimarket, to place large orders with us that will ship over several quarters. We expect this may, at times, result in period over period fluctuations in order levels that are not necessarily indicative of changing demand but rather reflect the timing of when these large orders were placed. 

At December 31, 2021, our backlog of unfilled orders for all products was approximately $34.1 million compared with approximately $11.5 million at December 31, 2020. The significant increase in our backlog primarily reflects the aforementioned increase in demand during 2021 in combination with the $10.0 million order received from one of our Thermal segment’s front-end Semi Market customers during the fourth quarter of 2021. Our backlog includes customer orders that we have accepted, substantially all of which we expect to deliver in 2022. While backlog is calculated on the basis of firm purchase orders, a customer may cancel an order or accelerate or postpone currently scheduled delivery dates. Our backlog may be affected by the tendency of customers to rely on short lead times available from suppliers, including us, in periods of depressed demand. In periods of increased demand, there is a tendency towards longer lead times that has the effect of increasing backlog. As a result, our backlog at a particular date is not necessarily indicative of sales for any future period.

Revenue

The following table sets forth, for the periods indicated, a breakdown of the revenue by operating segment and market (in thousands).

Total consolidated revenue for the year ended December 31, 2021 was $84.9 million compared to $53.8 million in 2020, an increase of $31.1 million or 58% as compared to 2020. Revenue from acquired businesses in 2021 (from the respective dates of acquisition through December 31, 2021) was $1.5 million, all of which was attributable to Multimarket.

We believe the increase in our consolidated revenue as compared to the same period in 2020 primarily reflects the aforementioned increase in demand from the Semi Market. We also attribute the increase to new product introductions and the reopening of trade shows, which have resulted in new customer opportunities and wins. We believe the EV market continues to gain traction with a variety of applications for induction heating technology.

COVID-19 Pandemic

We are following the guidance of the CDC and the local regulatory authorities in regions outside the U.S. While we are no longer requiring employees to wear masks indoors in our domestic locations, we are encouraging all employees to receive COVID-19 vaccinations and boosters, if possible. We are continuing to conduct temperature screenings and encourage all employees to maintain social distancing when applicable. We are also continuing to allow employees to work remotely either part-time or full-time in circumstances when possible. While the negative impact of COVID-19 on our business was reduced significantly throughout 2021, the spread of the virus or variants of the virus could worsen and one or more of our significant customers or suppliers could be impacted, or significant additional governmental regulations and restrictions could be imposed, thus negatively impacting our business in the future. We continue to monitor the situation closely in the regions in which we operate in the U.S. and abroad and will adjust our operations as necessary to protect the health and well-being of our employees. To the extent that further governmental mandates or restrictions are implemented in the future, we currently expect to be able to continue to operate our business in a manner similar to how we have operated over the past year. See “Risks Related to COVID-19” under Item 1A “Risk Factors” in this Report.

Results of Operations

The results of operations for our two operating segments are generally affected by the same factors described in the Overview section above. Separate discussions and analyses for each segment would be repetitive. The discussion and analysis that follows, therefore, is presented on a consolidated basis and includes discussion of factors unique to each operating segment where significant to an understanding of that segment.

Year Ended December 31, 2021 Compared to Year Ended December 31, 2020

Revenue.  revenue was $84.9 million for the year ended December 31, 2021 compared to $53.8 million in 2020, an increase of $31.1 million or 58%. We believe this increase reflects the factors previously discussed in the Overview section above.

Gross Margin. Gross margin was 49% for the year ended December 31, 2021 compared to 45% in 2020. The increase in our gross margin primarily reflects better absorption of fixed operating costs as a result of the higher revenue levels in 2021. Our fixed operating costs increased $433,000 in absolute dollar terms as compared to the same period in 2020 but represented only 12% of revenue in 2021 compared to 18% of revenue in 2020. The $433,000 increase in our fixed operating costs reflects higher salaries, as we have invested in additional headcount, a return to more normal levels of travel, as COVID restrictions have been reduced or eliminated, and an increase in spending on plant maintenance and supplies, reflecting the increased production activity throughout 2021. This improvement in absorption of fixed operating costs was partially offset by an increase in our component material costs as a percent of revenue, which increased from 34% of revenue for the year ended December 31, 2020 to 37% of revenue for the year ended December 31, 2021. This increase reflects changes in product mix as well as the impact of global supply chain challenges which have resulted in higher prices from our vendors.

Selling Expense. Selling expense was $11.1 million for the year ended December 31, 2021 compared to $7.5 million in 2020, an increase of $3.6 million or 47%. Commissions increased $1.7 million and standard warranty accruals increased $217,000, both of which primarily reflect the higher revenue levels. We also had an increase in salaries and benefits expense due to additional headcount in our EMS segment and higher levels of travel and trade show expense in both of our segments as COVID-19 restrictions were reduced or eliminated.

Engineering and Product Development Expense. Engineering and product development expense was $5.5 million for the year ended December 31, 2021 compared to $5.1 million in 2020, an increase of $461,000, or 9%. The increase primarily reflects higher salaries and benefits expense as a result of headcount additions in both our segments and an increase in spending on third-party consultants and materials used in new product development. These increases were partially offset by a reduction in legal fees related to our intellectual property.

General and Administrative Expense. General and administrative expense was $15.9 million for the year ended December 31, 2021 compared to $11.4 million in 2020, an increase of $4.4 million, or 39%. During 2021, we incurred $1.9 million of transaction expenses related to acquisitions and costs associated with financing activities, including a potential capital raise which the Board and management elected to forego due to market conditions and the availability of our new credit facility. There were no similar expenses in 2020. The remaining increase in expenses in 2021 as compared to 2020 reflects higher profit-related bonuses, higher costs for stock-based compensation, both as a result of an increase in the amount of awards as well as an increase in our stock price, higher spending on recruitment and employee engagement in connection with our investment in headcount and our strategic plan, and an increase of approximately $200,000 in amortization related to acquired intangibles.

Restructuring and Other Charges. For the year ended December 31, 2021, we recorded $286,000 in restructuring and other charges. Of this amount, $169,000 was related to finalizing the consolidation of our EMS manufacturing operations, as discussed in the Overview. The remainder of the charges in 2021 was primarily related to the retirement of our former CFO. For the year ended December 31, 2020, we recorded $1.3 million in restructuring and other charges. Of this amount, $903,000 was related to the consolidation of our EMS manufacturing operations, $189,000 was related to the reduction of the administrative footprint in our Mansfield, Massachusetts corporate office associated with the reestablishment of the Mt. Laurel, New Jersey office as our corporate headquarters, $133,000 was related to the executive management changes that occurred in the third quarter of 2020 and $60,000 was related to other restructuring actions taken during 2020. All of these actions and the related charges are discussed in more detail in Note 5 to our consolidated financial statements.

Income Tax Expense. For the year ended December 31, 2021, we recorded income tax expense of $1.1 million compared to an income tax benefit of $336,000 in 2020. Our effective tax rate was 13% for 2021 compared to 27% for 2020. On a quarterly basis, we record income tax expense or benefit based on the expected annualized effective tax rate for the various taxing jurisdictions in which we operate our businesses. The lower effective tax rate in 2021 primarily reflects both an increase in the deduction for foreign-derived intangible income and an increase in the level of our tax deductions related to stock-based compensation. To a lesser extent, we also recorded increased levels of expected tax credits driven by both research and development activities and foreign operations. See Note 13 to our consolidated financial statements for further detail of the difference between our effective tax rates in 2021 and 2020 and the statutory tax rate of 21%.

Liquidity and Capital Resources

As discussed more fully in the Overview, our business and results of operations are substantially dependent upon the demand for ATE by semiconductor manufacturers and companies that specialize in the testing of ICs. The cyclical and volatile nature of demand for ATE makes estimates of future revenues, results of operations and net cash flows difficult.

Our primary historical source of liquidity and capital resources has been cash flow generated by our operations. In 2021, we also utilized our new credit facility, which is discussed further in the Overview and below, to fund our acquisitions. We manage our businesses to maximize operating cash flows as our primary source of liquidity for our short-term cash requirements, as discussed below. We use cash to fund growth in our operating assets, for new product research and development, for acquisitions and for stock repurchases. We currently anticipate that any additional long-term cash requirements related to our strategy would be funded through a combination of our cash and cash equivalents, our new credit facility or by issuing equity.

Credit Facility

As discussed in the Overview and in Note 12 to our consolidated financial statements in this Report, on October 15, 2021, we entered into the October 2021 Agreement with M&T. The October 2021 Agreement includes a $25 million Term Note and a $10 million revolving credit facility and replaces our prior credit facility with M&T. The October 2021 Agreement has a five-year contract period that expires on October 15, 2026 and draws under the Term Note will be permissible for two years. The principal balance of the revolving credit facility and the principal balance of any amount drawn under the Term Note will accrue interest based on the Secured Overnight Financing Rate or a bank-defined base rate plus an applicable margin, depending on leverage. The October 2021 Agreement includes customary affirmative, negative and financial covenants, including a maximum ratio of consolidated funded debt to consolidated EBITDA and a fixed charge coverage ratio. Our obligations under the October 2021 Agreement are secured by liens on substantially all of our tangible and intangible assets.

On October 28, 2021, we drew $12 million under the Term Note to finance the acquisition of Videology. We also entered into an interest rate swap agreement with M&T as of this date which is designed to protect us against fluctuations in interest rates during the five-year repayment and amortization period. As a result, the annual interest rate we expect to pay for this draw under the Term Note is fixed at approximately 3.2% based on current leverage. On October 28, 2021, the October 2021 Agreement was amended to include our subsidiary, Videology Imaging Corporation, as a subsidiary guarantor thereunder.

On December 29, 2021, we drew $8.5 million under the Term Note to finance the acquisition of Acculogic. We did not enter into an interest rate swap agreement with M&T related to this draw. The annual interest rate we expect to pay for this draw under the Term Note is variable. At December 31, 2021, it was approximately 2.1% based on current leverage. On December 29, 2021, the October 2021 Agreement was amended to include our subsidiaries, Acculogic Ltd. and Acculogic Inc., as subsidiary guarantors thereunder.

At December 31, 2021, there were no amounts borrowed under our revolving credit facility. This facility has a total borrowing availability of $10.0 million. At December 31, 2021 we had utilized $20.5 million of the availability under our Term Note and we had $4.5 million remaining available under our Term Note.

Liquidity

Our cash and cash equivalents and working capital were as follows (in thousands):

As of December 31, 2021, $4.0 million, or 19%, of our cash and cash equivalents was held by our foreign subsidiaries. We currently expect our cash and cash equivalents, in combination with the borrowing capacity available under our revolving credit facility and the anticipated net cash to be provided by our operations in the next twelve months to be sufficient to support our short-term working capital requirements and other corporate requirements. Our revolving credit facility is discussed in Note 12 to our consolidated financial statements.

Our material short-term cash requirements include payments due under our various lease agreements, recurring payroll and benefits obligations to our employees, purchase commitments for materials that we use in the products we sell and principal and interest payments on our debt. We estimate that our minimum short-term working capital requirements currently range between $8.0 million and $10.0 million. We also anticipate making investments in our business in the next twelve months including hiring of additional staff, updates to our website and other systems and investments related to our geographic and market expansion efforts. We expect our current cash and cash equivalents, in combination with the borrowing capacity available under our revolving credit facility and the anticipated net cash to be provided by our operations to be sufficient to support these additional investments as well as our current short-term cash requirements.

Our current strategy for growth includes pursuing acquisition opportunities for complementary businesses, technologies or products. As discussed further in the Overview, on October 28, 2021, we acquired substantially all of the assets of Videology and on December 21, 2021, we completed the acquisition of Acculogic. We utilized $20.5 million under our new credit facility to finance these acquisitions. As previously discussed, we currently anticipate that any additional long-term cash requirements related to our strategy would be funded through a combination of our cash and cash equivalents, the remaining availability under our new credit facility or by issuing equity. 

Cash Flows

Operating Activities. Net cash provided by operations for the year ended December 31, 2021 was $10.8 million. For the year ended December 31, 2021, we recorded net earnings of $7.3 million. During this same period, we had non-cash charges of $3.1 million for depreciation and amortization (which included $1.0 million of amortization related to right-of-use ("ROU") assets) and $1.5 million for deferred compensation expense related to stock-based awards. Excluding the impact of acquired businesses, accounts receivable increased $4.8 million, inventories increased $2.5 million and accounts payable increased $1.2 million during 2021, reflecting the higher level of business activity in 2021. Customer deposits and deferred revenue increased $4.8 million in 2021, primarily as a result of a deposit related to the $10.0 million order we received in the fourth quarter of 2021, as discussed in the Overview. Operating lease liabilities decreased $1.2 million during 2021, reflecting payments made under our various lease agreements. Accrued wages and benefits increased $1.2 million, primarily reflecting the accrual of profit-based bonuses on our results for the year.  

Investing Activities. During the year ended December 31, 2021, we utilized $20.4 million of cash to acquire businesses as discussed in the Overview. As discussed below under “Financing Activities”, we utilized our Term Note to finance these purchases. During this same period, purchases of property and equipment were $994,000, primarily representing purchases to support general business operations. These purchases were funded using our working capital. We have no significant commitments for capital expenditures for 2022; however, depending upon changes in market demand or manufacturing and sales strategies, we may make such purchases or investments as we deem necessary and appropriate. These additional cash requirements would be funded by our cash and cash equivalents, anticipated net cash to be provided by operations and our revolving credit facility.

Financing Activities. During the year ended December 31, 2021, we borrowed $20.5 million under our Term Note to finance the acquisitions of Videology and Acculogic, as previously discussed. We repaid $400,000 of principal during this same period. During the year ended December 31, 2021, we received $1.6 million as a result of the exercise of options to acquire 231,185 shares of our stock. These options were issued to certain current and former employees under our stock-based compensation plans which are discussed in Note 15 to our consolidated financial statements in this Report.

New or Recently Adopted Accounting Standards

See Note 2 to the consolidated financial statements for information concerning the implementation and impact of new or recently adopted accounting standards.

Critical Accounting Estimates

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to inventories, long-lived assets, goodwill, identifiable intangibles and deferred income tax valuation allowances. We base our estimates on historical experience and on appropriate and customary assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Some of these accounting estimates and assumptions are particularly sensitive because of their significance to our consolidated financial statements and because of the possibility that future events affecting them may differ markedly from what had been assumed when the financial statements were prepared.

Inventory Valuation

Inventories are valued at cost on a first-in, first-out basis, not in excess of market value. Cash flows from the sale of inventories are recorded in operating cash flows. On a quarterly basis, we review our inventories and record excess and obsolete inventory charges based upon our established objective excess and obsolete inventory criteria. Our criteria identify excess material as the quantity of material on hand that is greater than the average annual usage of that material over the prior three years. Effective January 1, 2021, our criteria identify obsolete material as material that has not been used in a work order during the prior twenty-four months. Prior to January 1, 2021, these criteria identified obsolete material as material that had not been used in a work order during the prior twelve months. In certain cases, additional excess and obsolete inventory charges are recorded based upon current market conditions, anticipated product life cycles, new product introductions and expected future use of the inventory. The excess and obsolete inventory charges we record establish a new cost basis for the related inventories. During 2021 and 2020, we recorded inventory obsolescence charges for excess and obsolete inventory of $203,000 and $444,000, respectively.

Goodwill, Intangible and Long-Lived Assets

We account for goodwill and intangible assets in accordance with Accounting Standards Codification ("ASC") Topic 350 (Intangibles- Goodwill and Other). Finite-lived intangible assets are amortized over their estimated useful economic life and are carried at cost less accumulated amortization. Goodwill is assessed for impairment at least annually in the fourth quarter, on a reporting unit basis, or more frequently when events and circumstances occur indicating that the recorded goodwill may be impaired. As a part of the goodwill impairment assessment, we have the option to perform a qualitative assessment to determine whether it is more-likely-than-not that the fair value of a reporting unit is less than its carrying amount. If, as a result of our qualitative assessment, we determine this is the case, we are required to perform a goodwill impairment test to identify potential goodwill impairment and measure the amount of goodwill impairment loss to be recognized. The test is discussed below. If, as a result of our qualitative assessment, we determine that it is more-likely-than-not that the fair value of the reporting unit is greater than its carrying amounts, the goodwill impairment test is not required. 

The quantitative goodwill impairment test, used to identify both the existence of impairment and the amount of impairment loss, compares the fair value of a reporting unit with its carrying amount, including goodwill. If the fair value of a reporting unit exceeds its carrying amount, goodwill of the reporting unit is considered not impaired. If the carrying amount of a reporting unit exceeds its fair value, an impairment loss shall be recognized in an amount equal to that excess, limited to the total amount of goodwill allocated to that reporting unit. The goodwill impairment assessment is based upon the income approach, which estimates the fair value of our reporting units based upon a discounted cash flow approach. This fair value is then reconciled to our market capitalization at year end with an appropriate control premium. The determination of the fair value of our reporting units requires management to make significant estimates and assumptions including the selection of control premiums, discount rates, terminal growth rates, forecasts of revenue and expense growth rates, income tax rates, changes in working capital, depreciation, amortization and capital expenditures. Changes in assumptions concerning future financial results or other underlying assumptions could have a significant impact on either the fair value of the reporting unit or the amount of the goodwill impairment charge. At December 31, 2021 and 2020, goodwill was $21.4 million and $13.7 million, respectively. We did not record any impairment charges related to our goodwill during 2021 or 2020.

Indefinite-lived intangible assets are assessed for impairment at least annually in the fourth quarter, or more frequently if events or changes in circumstances indicate that the asset might be impaired. As a part of the impairment assessment, we have the option to perform a qualitative assessment to determine whether it is more likely than not that an indefinite-lived intangible asset is impaired. If, as a result of our qualitative assessment, we determine that it is more-likely-than-not that the fair value of the indefinite-lived intangible asset is less than its carrying amount, the quantitative impairment test is required; otherwise, no further testing is required. The quantitative impairment test consists of a comparison of the fair value of the intangible asset with its carrying amount. If the carrying amount of the intangible asset exceeds its fair value, an impairment loss is recognized in an amount equal to that excess. At December 31, 2021 and 2020, our indefinite-lived intangible assets were trademarks and trade names carried at $8.4 million and $6.7 million, respectively. We did not record any impairment charges related to our indefinite-lived intangible assets during 2021 or 2020.

Long-lived assets, which consist of finite-lived intangible assets, property and equipment and ROU assets, are assessed for impairment whenever events or changes in business circumstances indicate that the carrying amount of the assets may not be fully recoverable or that the useful lives of these assets are no longer appropriate. Each impairment test is based on a comparison of the estimated undiscounted cash flows to the recorded value of the asset. If impairment is indicated, the asset is written down to its estimated fair value. The cash flow estimates used to determine the impairment, if any, contain management's best estimates using appropriate assumptions and projections at that time. At December 31, 2021 and 2020, finite-lived intangibles and long-lived assets were $21.8 million and $14.4 million, respectively. We recorded impairment charges totaling $612,000 during the year ended December 31, 2020 related to certain of our ROU assets as discussed further in Note 5 to our consolidated financial statements. We did not record any impairment charges related to our long-lived assets during 2021.

Contingent Consideration Liabilities

The contingent consideration liabilities on our balance sheet are accounted for in accordance with the guidance in ASC 820 (Fair Value Measurement). ASC 820 establishes a fair value hierarchy for instruments measured at fair value that distinguishes between assumptions based on market data (observable inputs) and our own assumptions (unobservable inputs). Our contingent consideration liabilities are measured at fair value on a recurring basis using Level 3 inputs which are inputs that are unobservable and significant to the overall fair value measurement. These unobservable inputs reflect our assumptions about the inputs that market participants would use in pricing the asset or liability and are developed based on the best information available in the circumstances.

Our contingent consideration liabilities are a result of our acquisitions of Z-Sciences on October 6, 2021, and Acculogic on December 21, 2021. The contingent consideration for Z-Sciences represents the fair value of the balance of the purchase price less the working capital adjustment and is payable on the one-year anniversary of the acquisition if the founder remains an employee or consultant for us at that time. The fair value of this Level 3 instrument involves assessing whether we expect this to occur. As of December 31, 2021, the contingent consideration liability on our balance sheet was $179,000 and was included in Other Current Liabilities. The contingent consideration for Acculogic represents the fair value of additional payments we may make to the seller of up to an additional CAD $5.0 million in the five-year period from 2022 through 2026. The additional payments will be based on a percent of net invoices for which payments have been received on systems sold to EV or battery customers in excess of CAD $2.5 million per year in each of the five years. The maximum payment is capped at CAD $5.0 million, which equates to approximately $4.0 million at December 31, 2021. The fair value of this Level 3 instrument involves assessing the total amount of revenue we expect from sales to EV or battery customers during the applicable time period as well as when we expect to receive payment for the related net invoices. As of December 31, 2021, the contingent consideration liability on our balance sheet was $930,000.

Income Taxes

The asset and liability method is used in accounting for income taxes. Under this method, deferred tax assets and liabilities are recognized for operating loss and tax credit carryforwards and for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in the results of operations in the period that includes the enactment date.

Deferred tax assets are analyzed to determine if there will be sufficient taxable income in the future in order to realize such assets. We assess all of the positive and negative evidence concerning the realizability of the deferred tax assets, including our historical results of operations for the recent past and our projections of future results of operations, in which we make subjective determinations of future events. If, after assessing all of the evidence, both positive and negative, a determination is made that the realizability of the deferred tax assets is not more likely than not, we establish a deferred tax valuation allowance for all or a portion of the deferred tax assets depending upon the specific facts. If any of the significant assumptions were changed, materially different results could occur, which could significantly change the amount of the deferred tax valuation allowance established. As of December 31, 2021 and 2020, we had a net deferred tax liability of $1.4 million and $1.9 million, respectively. Our deferred tax valuation allowance at December 31, 2021 and 2020 was $64,000 and $169,000, respectively.
 

Off-Balance Sheet Arrangements

There were no off-balance sheet arrangements during the year ended December 31, 2021 that have or are reasonably likely to have, a material current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, cash requirements or capital resources.

This disclosure is not required for a smaller reporting company.

Consolidated financial statements are set forth in this Report beginning at page F-1 and are incorporated by reference into this Item 8.

None.

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures, as such term is defined in Rule 13a-15(e) under the Exchange Act. Because there are inherent limitations in all control systems, a control system, no matter how well conceived and operated, can provide only reasonable, as opposed to absolute, assurance that the objectives of the control system are met. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Our management, including the Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), does not expect that our disclosure controls and procedures or our internal control over financial reporting will prevent all error and all fraud. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected. Accordingly, our management has designed the disclosure controls and procedures to provide reasonable assurance that the objectives of the control system were met.

CEO/CFO Conclusions about the Effectiveness of the Disclosure Controls and Procedures. As required by Rule 13a-15(b) of the Exchange Act, inTEST management, including our CEO and CFO, conducted an evaluation as of the end of the period covered by this Report, of the effectiveness of our disclosure controls and procedures. Based on that evaluation, our CEO and CFO concluded that, as of the end of the period covered by this Report, our disclosure controls and procedures were effective at the reasonable assurance level.

Changes in Internal Control Over Financial Reporting

During the period covered by this Report, there has been no change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) that occurred during the period covered by this Report that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting. 

Management's Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is defined in Rule 13a-15(f) and 15d-15(f) under the Exchange Act as a process designed by, or under the supervision of, our principal executive and principal financial officers and effected by our Board of Directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that:

As previously noted in this Report, during the fourth quarter of 2021, we completed the acquisitions of Z-Sciences (now North Sciences), Videology and Acculogic (collectively the “acquired entities”). We have excluded certain elements of the acquired entities from our assessment of the effectiveness of our internal control over financial reporting as of December 31, 2021, as permitted under existing guidance issued by the SEC for newly acquired businesses. The acquired entities’ total assets as of December 31, 2021, and total revenue for the period from the acquisition dates through December 31, 2021, excluded from our management assessment represented 8.0% and 1.8% of our consolidated total assets and revenue, respectively.

Because of inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2021. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) on Internal Control-Integrated 2013 Framework. Based upon this assessment, management believes that, as of December 31, 2021, our internal control over financial reporting is effective at a reasonable assurance level.

This annual report does not include an attestation report of our independent registered public accounting firm regarding internal control over financial reporting, as such an attestation is not required pursuant to rules of the SEC applicable to registrants that are non-accelerated filers.

None.

Not Applicable.

PART III

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2022 Annual Meeting of Stockholders to be filed with the SEC within 120 days after the end of the fiscal year covered by this Report.

Code of Ethics

We have adopted a Code of Ethics (the “Code”) as a guide to the standards of business conduct to which our employees, officers and directors must adhere. A copy of the Code can be found on our website at https://intestcorp.gcs-web.com/corporate-governance. We intend to satisfy the disclosure requirements of the SEC regarding amendments to, or waivers from, the Code by posting such information on the same website. 

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2022 Annual Meeting of Stockholders to be filed with the SEC within 120 days after the end of the fiscal year covered by this Report.

The information required by Item 201(d) of Regulation S-K is set forth below. The remainder of the information required by this Item 12 is incorporated by reference from our definitive proxy statement for our 2022 Annual Meeting of Stockholders to be filed with the SEC within 120 days after the end of the fiscal year covered by this Report.

The following table shows the number of securities that may be issued pursuant to our equity compensation plans (including individual compensation arrangements) as of December 31, 2021:

Equity Compensation Plan Information

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2022 Annual Meeting of Stockholders to be filed with the SEC within 120 days after the end of the fiscal year covered by this Report.

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2022 Annual Meeting of Stockholders to be filed with the SEC within 120 days after the end of the fiscal year covered by this Report.

PART IV

(i)     Our consolidated financial statements and notes thereto as well as the applicable report of our independent registered public accounting firm are included in Part II, Item 8 of this Annual Report on Form 10-K.
(ii)    The following financial statement schedule should be read in conjunction with the consolidated financial statements set forth in Part II, Item 8 of this Annual Report on Form 10-K:
                Schedule II -- Valuation and Qualifying Accounts
(iii)   The exhibits required by Item 601 of Regulation S-K are included under Item 15(b) of this Annual Report on Form 10-K.

A list of the Exhibits which are required by Item 601 of Regulation S-K and filed with this Report is set forth in the Index  to Exhibits immediately preceding the signature page, which Index to Exhibits is incorporated herein by reference.

None.

Index to Exhibits 

Signatures 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

inTEST Corporation

Pursuant to the requirements of Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

inTEST CORPORATION

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND
FINANCIAL STATEMENT SCHEDULE

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and the Board of Directors of inTEST Corporation

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of inTEST Corporation and its subsidiaries (the Company) as of December 31, 2021 and 2020, the related consolidated statements of operations, comprehensive earnings (loss), stockholders' equity and cash flows for the years then ended, and the related notes to the consolidated financial statements and schedule (collectively, the financial statements). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matters communicated below are a matter arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

Business Combination

As disclosed in Note 3 to the Company’s consolidated financial statements on October 28, 2021, the Company acquired substantially all of the assets of Videology, a global designer, developer and manufacturer of OEM digital streaming and image capturing solutions for consideration of $12.1 million.  On December 21, 2021, the Company acquired all of the outstanding capital stock of Acculogic, a global manufacturer of robotics-based electronic production test equipment and application support services for $9.3 million.  The transactions were accounted for as business combinations. The purchase consideration was allocated among the acquired assets and liabilities, including several acquired intangible assets.

We identified the accounting for the business combinations as a critical audit matter because of the significant, subjective assumptions used and judgments made by management in developing the discounted cash flow models used to estimate the fair value of the intangible assets acquired in the business combinations.  As a result, we performed audit procedures to test the Company’s discounted cash flow models, including significant assumptions related to revenue growth rates, royalty rates, discount rates, and contingent consideration that are affected by expected future market or economic conditions.  In addition, we used professionals with specialized skill and knowledge in valuation methods to assist us in performing these procedures. 

Addressing the accounting for business combinations involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. These procedures included, among others:

Valuation of Goodwill

As disclosed in Notes 2 and 6 to the Company’s consolidated financial statements, the Company has two operating segments which are also its reporting units - Thermal and EMS. As of December 31, 2021, the Company’s goodwill balance of approximately $21.4 million was allocated to the Company’s Thermal reporting unit. The Company evaluates its goodwill for impairment annually at the beginning of the fourth quarter, or more frequently whenever events or changes in circumstances indicate that it is more likely than not that the carrying value of goodwill may not be recoverable. The Company performed its annual goodwill impairment test as of October 1, 2021 using a quantitative approach.

We identified goodwill impairment as a critical audit matter because of the significant, subjective assumptions used and judgments made by management in developing the discounted cash flow model used to estimate the fair value of the Thermal reporting unit. As a result, we performed audit procedures to test the Company’s discounted cash flow model, including significant assumptions related to the revenue growth rate, operating margins, and the discount rate that are affected by expected future market or economic conditions. In addition, we used professionals with specialized skill and knowledge in valuation methods to assist us in performing these procedures.

Addressing the potential impairment of goodwill involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. These procedures included, among others:

/s/ RSM US LLP

We have served as the Company's auditor since 2008.

Blue Bell, Pennsylvania
March 23, 2022

inTEST CORPORATION
CONSOLIDATED BALANCE SHEETS
(In thousands, except share and per share data)

See accompanying Notes to Consolidated Financial Statements.

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except share and per share data)

See accompanying Notes to Consolidated Financial Statements.

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE EARNINGS (LOSS)
(In thousands)